The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify equipment and power requirements.
|
|
Match appropriate equipment for drilling, cutting and grinding to work applications. Completed |
Evidence:
|
Choose correct power and air sources, identifying and selecting correct voltage, amperage and air pressure. Completed |
Evidence:
|
Select correct lubrication and/or water separation equipment as required. Completed |
Evidence:
|
Inspect equipment for signs of damage or faults. Completed |
Evidence:
|
Select correct accessories in terms of suitability for purpose and operable condition. Completed |
Evidence:
|
Follow emergency shutdown procedures.
|
|
Identify the circumstances which would justify an emergency shutdown of equipment. Completed |
Evidence:
|
Identify appropriate switches and/or other shutoff apparatus. Completed |
Evidence:
|
Shut down equipment in an emergency. Completed |
Evidence:
|
Complete reporting required following an emergency shutdown. Completed |
Evidence:
|
Control hazards associated with using the equipment.
|
|
Identify potential hazards arising from power sources and/or compressed air. Completed |
Evidence:
|
Recognise process by-products which may cause damage to the operator, environment, products, raw materials, other equipment or personnel. Completed |
Evidence:
|
Follow procedures to control hazards. Completed |
Evidence:
|
Set up equipment according to procedures.
|
|
Check equipment settings, accessories and consumables for acceptable condition. Completed |
Evidence:
|
Check equipment for sharpness/wear as appropriate. Completed |
Evidence:
|
Use manufacturer or workplace instructions for equipment as the basis of work practices. Completed |
Evidence:
|
Correctly set-up equipment for the required production process. Completed |
Evidence:
|
Check equipment through the full operating range required for the task. Completed |
Evidence:
|
Use equipment for production processes.
|
|
Operate equipment within the parameters of the manufacturer or workplace instructions. Completed |
Evidence:
|
Use appropriate consumables including cooling and lubricating fluids where required. Completed |
Evidence:
|
Deal with dust, swarf, off cuts and other production by-products and waste. Completed |
Evidence:
|
Shut down equipment according to procedure.
|
|
Shut down equipment as required. Completed |
Evidence:
|
Dispose of any dust, swarf, off cuts and other production by-products and waste. Completed |
Evidence:
|
Store equipment appropriately.
|
|
Clean equipment prior to storage. Completed |
Evidence:
|
Tag or take appropriate steps to arrange repair or servicing of equipment as required. Completed |
Evidence:
|
Maintain storage areas to workplace standards. Completed |
Evidence:
|