The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify work requirements for vulcanising operations.
|
|
Identify the job and vulcaniser characteristics and product quality outcomes required. Completed |
Evidence:
|
Obtain specifications relevant to the material being vulcanised. Completed |
Evidence:
|
Identify and obtain equipment and materials required for the vulcanising process. Completed |
Evidence:
|
Identify hazards associated with the job and take appropriate action. Completed |
Evidence:
|
Check materials, ancillary supplies, and equipment for quality, access and condition. Completed |
Evidence:
|
Identify and check emergency stops, gauges, guards and controls. Completed |
Evidence:
|
Plan vulcanising operations.
|
|
Identify time, pressure and temperature requirements. Completed |
Evidence:
|
Plan the task sequences Completed |
Evidence:
|
Plan for waste management, maintenance and housekeeping requirements. Completed |
Evidence:
|
Prepare vulcanising equipment.
|
|
Check vulcaniser, ancillary, equipment and attachments are fit for purpose. Completed |
Evidence:
|
Set up vulcanising press according to procedures. Completed |
Evidence:
|
Set equipment control parameters to specifications. Completed |
Evidence:
|
Obtain appropriate clearances for vulcanising to commence. Completed |
Evidence:
|
Conduct and monitor vulcanising operations.
|
|
Start the unit and commence vulcanising. Completed |
Evidence:
|
Monitor the unit operation throughout the entire process Completed |
Evidence:
|
Note and report non-conformity to specifications to procedures. Completed |
Evidence:
|
Make adjustments as required. Completed |
Evidence:
|
Shut down unit when cycle completed. Completed |
Evidence:
|
Follow procedure to disassemble equipment as required. Completed |
Evidence:
|
Assess the outcome of the vulcanising process and take remedial action as necessary and report to the appropriate person. Completed |
Evidence:
|
Brand splice as per company policy Completed |
Evidence:
|
Clean up, lubricate and adjust equipment as required. Completed |
Evidence:
|
Complete waste removal or recycling as required. Completed |
Evidence:
|
Respond to routine problems to procedure.
|
|
Recognise known faults that occur during the operation. Completed |
Evidence:
|
Identify and take action on causes of routine faults. Completed |
Evidence:
|
Log problems as required. Completed |
Evidence:
|
Identify non-routine process and quality problems and take appropriate action. Completed |
Evidence:
|