The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Check work requirements
|
|
Identify work requirements from production plan Completed |
Evidence:
|
Identify specific requirements of the tyre being retreaded Completed |
Evidence:
|
Identify required equipment, including handling, buffing, inspection and repair equipment Completed |
Evidence:
|
Ask questions of appropriate person to confirm unusual practice Completed |
Evidence:
|
Identify hazards associated with the job and take appropriate action Completed |
Evidence:
|
Perform other pre-operational checks in accordance with procedures Completed |
Evidence:
|
Start up of tyre buffer to procedures
|
|
Conduct pre-start checks Completed |
Evidence:
|
Start up tyre buffer Completed |
Evidence:
|
Operate buffing equipment to procedures
|
|
Start machine safely and correctly when required Completed |
Evidence:
|
Monitor buffing operations noting process stages, depth of cut (according to standard operating procedures) and abrasion Completed |
Evidence:
|
Check against workplace standards for colour and texture before completing process Completed |
Evidence:
|
Make adjustments to remedy non-conformity to buffing requirements Completed |
Evidence:
|
Buzz out areas around exposed steel radials with hand held stone grinder Completed |
Evidence:
|
Collect and reprocess/discard scrap/trim and other materials, as required Completed |
Evidence:
|
Keep equipment and work area clean Completed |
Evidence:
|
Pause machine cycle and perform stop, as required Completed |
Evidence:
|
Repair imperfections
|
|
Locate casing imperfections from previous inspection Completed |
Evidence:
|
Repair casings (especially exposed steel areas) with rubber plugs in accordance with standard operating procedures Completed |
Evidence:
|
Complete logs and records as required Completed |
Evidence:
|
Complete operations
|
|
Check casings for compliance with specifications Completed |
Evidence:
|
Create job card, tyre ID and other tracking/information items needed as specified by procedures Completed |
Evidence:
|
Adhere the metal tag/s to the tyre wall with uncured rubber Completed |
Evidence:
|
Respond to routine problems to procedures
|
|
Recognise known faults that occur during the operation Completed |
Evidence:
|
Identify and take action on causes of routine faults Completed |
Evidence:
|
Log problems as required Completed |
Evidence:
|
Identify non-routine process and quality problems and take appropriate action Completed |
Evidence:
|