The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements.
|
|
Identify equipment and processes used for production process and upstream and downstream operations from production plan or request. Completed |
Evidence:
|
Identify materials required, including additives. Completed |
Evidence:
|
Recognise hazards and follow appropriate hazard control/minimisation methods. Completed |
Evidence:
|
Identify and check emergency stops, safety gates, guards and controls. Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks. Completed |
Evidence:
|
Identify materials, waste management and housekeeping needs. Completed |
Evidence:
|
Start up rotational moulding process.
|
|
Determine equipment requirements. Completed |
Evidence:
|
Set process to specifications as required. Completed |
Evidence:
|
Check rotational moulding equipment settings and adjustments are as required. Completed |
Evidence:
|
Check materials are correct. Completed |
Evidence:
|
Discard, or make adjustments to the process for, non-conforming materials. Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required. Completed |
Evidence:
|
Complete other pre-start checks in accordance with procedures. Completed |
Evidence:
|
Start up rotational moulding process. Completed |
Evidence:
|
Operate and make adjustments as required to the rotational moulding process.
|
|
Operate rotational moulding equipment, noting key variables. Completed |
Evidence:
|
Monitor controls/displays/terminals for production/process data. Completed |
Evidence:
|
Monitor product/process quality in accordance with procedures. Completed |
Evidence:
|
Make adjustments to remedy faults and nonconformity to standard as required. Completed |
Evidence:
|
Maintain continuity of process. Completed |
Evidence:
|
Collect and reprocess/discard scrap/trim and other materials in accordance with procedures. Completed |
Evidence:
|
Clean, adjust and lubricate equipment as required. Completed |
Evidence:
|
Pause equipment, or stop equipment in an emergency, following workplace and emergency procedures. Completed |
Evidence:
|
Anticipate and solve problems
|
|
Recognise a problem or a potential problem. Completed |
Evidence:
|
Determine problems needing priority action. Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes. Completed |
Evidence:
|
Seek information and assistance as required to solve problems. Completed |
Evidence:
|
Solve problems within area of responsibility. Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred. Completed |
Evidence:
|