The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan own work requirements
|
|
Identify the most appropriate equipment to be used for production and upstream and downstream operations from production plan or request Completed |
Evidence:
|
Identify and check materials required, including additives Completed |
Evidence:
|
Implement measures to control hazards in line with procedures and duty of care Completed |
Evidence:
|
Identify requirements for materials, quality, production and equipment checks Completed |
Evidence:
|
Start resin infusion moulding process to procedures
|
|
Identify process settings for required product Completed |
Evidence:
|
Set process to required settings Completed |
Evidence:
|
Check materials are correct Completed |
Evidence:
|
Take appropriate action for non-conforming materials Completed |
Evidence:
|
Set up date, batch and materials markings to specifications, as required Completed |
Evidence:
|
Complete pre-start checks Completed |
Evidence:
|
Start up resin infusion moulding process Completed |
Evidence:
|
Operate and make adjustments to the resin infusion process to procedures
|
|
Operate resin infusion equipment, noting key variables Completed |
Evidence:
|
Monitor controls/displays/terminals for production and process data Completed |
Evidence:
|
Take samples as required and identify product out of specification Completed |
Evidence:
|
Monitor product/process quality Completed |
Evidence:
|
Make adjustments to remedy faults and non-conformity to standard as required Completed |
Evidence:
|
Establish a stable resin infusion process Completed |
Evidence:
|
Adjust process to minimise scrap and trim Completed |
Evidence:
|
Clean, adjust and check equipment damage as required Completed |
Evidence:
|
Shut down machine to procedures
|
|
Determine type of shutdown Completed |
Evidence:
|
Select appropriate cleaning method Completed |
Evidence:
|
Clean efficiently and adequately as required Completed |
Evidence:
|
Leave machine in appropriate condition and with appropriate locks, tags or notices Completed |
Evidence:
|
Complete relevant documentation Completed |
Evidence:
|
Ensure area is clean and clear after the shutdown, in readiness for the next start-up Completed |
Evidence:
|
Anticipate and solve problems
|
|
Recognise a problem or a potential problem Completed |
Evidence:
|
Determine problems needing priority action Completed |
Evidence:
|
Refer problems outside area of responsibility to appropriate person, with possible causes Completed |
Evidence:
|
Seek information and assistance as required to solve problems Completed |
Evidence:
|
Solve problems within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|