The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to change advanced or complex die.
|
|
Determine when changeover will be required, and plan requirements for die change. Completed |
Evidence:
|
Prepare dies and all equipment related to the advanced or complex die change. Completed |
Evidence:
|
Prepare the moulding machine for die removal according to enterprise procedures. Completed |
Evidence:
|
Change dies.
|
|
Remove die according to enterprise procedures, in a safe, systematic and time efficient manner. Completed |
Evidence:
|
Clean and store die according to workplace procedures applying corrosion protection if required. Completed |
Evidence:
|
Prepare the moulding machine according to procedures. Completed |
Evidence:
|
Attach replacement die to the machine according to procedures. Completed |
Evidence:
|
Set advanced or complex die.
|
|
Set machine conditions for new die. Completed |
Evidence:
|
Restart machine as per procedure. Completed |
Evidence:
|
Dry cycle machine and die according to enterprise procedures. Completed |
Evidence:
|
Check operation of die and power and control devices against die set up specifications. Completed |
Evidence:
|
Check the first off sample for compliance with required standards. Completed |
Evidence:
|
Fine tune settings and other production variables as required. Completed |
Evidence:
|
Note any equipment variances between actual production and documented set up conditions. Completed |
Evidence:
|
Complete workplace documentation and report to appropriate personnel. Completed |
Evidence:
|
Anticipate die setting problems.
|
|
Identify potential problems which may occur during the die changing and setting process. Completed |
Evidence:
|
Determine possible causes of these problems. Completed |
Evidence:
|
Identify most likely causes and prioritise appropriate actions. Completed |
Evidence:
|
Rectify problems using appropriate solutions within area of responsibility. Completed |
Evidence:
|
Recommend improvements in systems or procedures. Completed |
Evidence:
|