The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Assemble and prepare the mould or former
|
|
Establish a safe working environment to procedures Completed |
Evidence:
|
Identify and prepare the appropriate mould or former Completed |
Evidence:
|
Level and secure the mould or former to procedures Completed |
Evidence:
|
Check that the base is stabilised and correctly mounted as required to facilitate rolling or turning out Completed |
Evidence:
|
Position inserts or loose pieces as required Completed |
Evidence:
|
Apply the correct stripping agent Completed |
Evidence:
|
Mould materials
|
|
Prepare the material mix or obtain the material from the batch preparation unit Completed |
Evidence:
|
Provide an adequate supply of material to meet production requirements Completed |
Evidence:
|
Introduce material to the workpiece cavity and compact to procedures Completed |
Evidence:
|
Check inserts or loose pieces and secure to avoid movement during moulding Completed |
Evidence:
|
Employ safe working practices consistent with procedures Completed |
Evidence:
|
Roll and strip/turn out the component for finishing Completed |
Evidence:
|
Finish the component/ product
|
|
Repair defects occurring during the moulding process Completed |
Evidence:
|
Remove inserts or loose pieces and replace in mould or former Completed |
Evidence:
|
Prepare the surface of the component for the application of any surface finishes Completed |
Evidence:
|
Cure or dry the components to specification Completed |
Evidence:
|
Return mould and/or segments for re-use or storage in accordance with requirements Completed |
Evidence:
|
Rectify routine problems
|
|
Identify the range of faults that can occur during the operation Completed |
Evidence:
|
Determine and rectify fault causes according to procedures Completed |
Evidence:
|
Identify and rectify equipment failure causes according to procedures Completed |
Evidence:
|
Make sure appropriate records and log books of equipment operations are maintained to meet procedures Completed |
Evidence:
|
Identify non-routine problems and report to designated person Completed |
Evidence:
|
Inspect and store components
|
|
Inspect component for defects Completed |
Evidence:
|
Store the component to specifications and procedures Completed |
Evidence:
|