The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare the extrusion equipment
|
|
Determine the product formation requirements from the production program Completed |
Evidence:
|
Ensure the required change parts are in place Completed |
Evidence:
|
Ensure the required raw materials are selected and loaded or connected to the equipment Completed |
Evidence:
|
Ensure the equipment is safe to use Completed |
Evidence:
|
Operate forming equipment
|
|
Ensure correct vacuum is applied to raw material Completed |
Evidence:
|
Operate equipment to produce product of the required shape, dimensions and consistency Completed |
Evidence:
|
Monitor equipment conditions and adjust as required Completed |
Evidence:
|
Monitor and adjust product properties as required Completed |
Evidence:
|
Record production data as required Completed |
Evidence:
|
Operate surface finishing equipment
|
|
Operate surface patterning equipment as required Completed |
Evidence:
|
Operate frit application and similar equipment as required Completed |
Evidence:
|
Monitor operations and adjust/refill as required Completed |
Evidence:
|
Apply glazing material as required Completed |
Evidence:
|
Unload and shut down extrusion equipment
|
|
Unload and shut down extrusion equipment at conclusion of the production run to requirements Completed |
Evidence:
|
Clean up work area and perform housekeeping duties Completed |
Evidence:
|
Store materials appropriately Completed |
Evidence:
|
Rectify routine problems
|
|
Identify the range of faults that can occur during the operation Completed |
Evidence:
|
Determine and rectify fault causes in accordance with procedures/work instructions Completed |
Evidence:
|
Identify and rectify equipment failure causes in accordance with procedures/work instructions Completed |
Evidence:
|
Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions Completed |
Evidence:
|
Identify non-routine problems and report to designated person Completed |
Evidence:
|
Control hazards
|
|
Identify hazards in extruder work area Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures and duty of care Completed |
Evidence:
|