The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for fabrication
|
|
Check quantities, type, size and shape of reinforcement supplied against drawings, tags and schedules Completed |
Evidence:
|
Prepare jigs and/or other assembly aids if applicable Completed |
Evidence:
|
Assemble/fabricate reinforcement
|
|
Assemble reinforcement using appropriate fixing method Completed |
Evidence:
|
Check final dimensions are to specification Completed |
Evidence:
|
Insert lifting devices, lugs, fittings, bar chairs and nibs according to standard operating procedures Completed |
Evidence:
|
Ensure minimum lap sizes are observed where applicable Completed |
Evidence:
|
Complete cage to enable lifting (if assembled outside the mould) Completed |
Evidence:
|
Report any non-compliance Completed |
Evidence:
|
Follow all occupational health and safety (OHS) procedures and work instructions Completed |
Evidence:
|
Rectify routine problems
|
|
Identify the range of faults that can occur during the operation Completed |
Evidence:
|
Determine and rectify fault causes in accordance with procedures/work instructions Completed |
Evidence:
|
Identify and rectify equipment failure causes in accordance with procedures/work instructions Completed |
Evidence:
|
Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions Completed |
Evidence:
|
Identify non-routine problems and report to designated person Completed |
Evidence:
|
Control hazards
|
|
Identify hazards from the job to be done Completed |
Evidence:
|
Identify other hazards in the work area Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures Completed |
Evidence:
|