The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Dismantle mould
|
|
Remove nuts and bolts as required Completed |
Evidence:
|
Remove mould Completed |
Evidence:
|
Clean and inspect mould
|
|
Identify product faults from visual inspection Completed |
Evidence:
|
Identify mould faults from visual inspection Completed |
Evidence:
|
Dismantle mould as per work instructions Completed |
Evidence:
|
Check condition of all mould parts Completed |
Evidence:
|
Clean mould parts Completed |
Evidence:
|
Reassemble mould
|
|
Identify product to be made Completed |
Evidence:
|
Interpret mould drawings/plans Completed |
Evidence:
|
Select and check required mould parts Completed |
Evidence:
|
Use correct mould setup jig Completed |
Evidence:
|
Assemble mould as per work instructions Completed |
Evidence:
|
Place and fix reinforcement cage as required Completed |
Evidence:
|
Check cover is adequate and fix or report as required Completed |
Evidence:
|
Check mould dimensions and tolerance Completed |
Evidence:
|
Check mould for joint leakage and correct if required Completed |
Evidence:
|
Lubricate mould
|
|
Lubricate mould to standard Completed |
Evidence:
|
Store mould in correct location Completed |
Evidence:
|
Maintain mould part stock control
|
|
Check stocks of spare parts Completed |
Evidence:
|
Advise supervisor of stock required, parts used and date of completed mould Completed |
Evidence:
|
Rectify routine problems
|
|
Identify the range of faults that can occur during the operation Completed |
Evidence:
|
Determine and rectify fault causes in accordance with procedures/work instructions Completed |
Evidence:
|
Identify and rectify equipment failure causes in accordance with procedures/work instructions Completed |
Evidence:
|
Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions Completed |
Evidence:
|
Identify non-routine problems and report to designated person Completed |
Evidence:
|
Control hazards
|
|
Identify hazards from the job to be done Completed |
Evidence:
|
Identify other hazards in the work area Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures Completed |
Evidence:
|