The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Select and set up tools and equipment
|
|
Check the information about the required tools and equipment is accurate and available for use according to work practices Completed |
Evidence:
|
Identify incorrect or incomplete information and take the necessary corrective action Completed |
Evidence:
|
Select and set up required tools and equipment to conform with the information and, where they are unsuitable, take the necessary corrective action Completed |
Evidence:
|
Use tools and equipment
|
|
Use appropriate tools and equipment to procedures Completed |
Evidence:
|
Inspect tools/equipment for wear/damage and rectify or report as appropriate Completed |
Evidence:
|
Clean tool/equipment and return to correct location after use Completed |
Evidence:
|
Contribute to the provision of a safe work environment
|
|
Identify hazards in work area particularly from blending/mixing Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures and duty of care Completed |
Evidence:
|
Control hazards
|
|
Identify hazards from the job to be done Completed |
Evidence:
|
Identify other hazards in the work area Completed |
Evidence:
|
Assess the risks arising from those hazards Completed |
Evidence:
|
Implement measures to control those risks in line with procedures Completed |
Evidence:
|
Respond to problems
|
|
Identify possible problems in equipment or process Completed |
Evidence:
|
Determine problems needing action Completed |
Evidence:
|
Determine possible fault causes Completed |
Evidence:
|
Rectify problem using appropriate solution within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|
Report problems outside area of responsibility to designated person Completed |
Evidence:
|