The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Design management plan
|
|
Review work order and inspection report to confirm task in accordance with company requirements Completed |
Evidence:
|
Identify hazards and control risks in the work site in accordance with legislative, occupational health and safety (OHS) and company requirements Completed |
Evidence:
|
Select suitable timber pestmanagement method option(s) for the control of timber pests based on the inspection report and work site environment and in accordance with legislation and company requirements Completed |
Evidence:
|
Identify, select and apply the most appropriate access and application equipment for implementing the timber pest management plan in accordance with manufacturers' specifications and legislative, OHS and company requirements Completed |
Evidence:
|
Identify appropriate materials for implementing the timber pest management plan and calculate requirements in accordance with manufacturers' specifications and legislative, OHS and company requirements Completed |
Evidence:
|
Prepare to implement timber pest management plan
|
|
Review timber pest management plan to identify any factors affecting the completion of the work order and clarify any issues with the appropriate person(s) in accordance with company requirements Completed |
Evidence:
|
Select and use suitable personal protective equipment (PPE) in accordance with manufacturers' specifications and OHS and company requirements Completed |
Evidence:
|
Select and check operational effectiveness of equipment in accordance with manufacturers' specifications and environmental, legislative, OHS and companyrequirements Completed |
Evidence:
|
Prepare chemicals and materials in accordance with manufacturers' specifications and environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Install appropriate signage and barriers as required to maximise public health and safety during the treatment operation Completed |
Evidence:
|
Implement management plan
|
|
Control hazards and control risks in the work site in accordance with legislative, OHS and company requirements Completed |
Evidence:
|
Install materials as identified in the timber pestmanagement plan in accordance with manufacturers' specifications and environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Conduct all work using safe operating practices in accordance with manufacturers' specifications and environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Review implementation to check the effectiveness of the timber pestmanagement plan Completed |
Evidence:
|
Respond to emergency situations using emergency response procedures in accordance with manufacturers' specifications and environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Restore work site
|
|
Restore work site to condition agreed with client and the requirements of the timber pest management plan in accordance with environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Eliminate hazards prior to handover in accordance with environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Remove any signage and barriers used when work site is available for re-use in accordance with work order and OHS and company requirements Completed |
Evidence:
|
Notify appropriate person(s) of any further hazard reduction or rectification measures necessary in accordance with environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Clean, safety-check and store equipment
|
|
Clean and decontaminate equipment and PPE in accordance with manufacturers' specifications and environmental, OHS and company requirements Completed |
Evidence:
|
Safety-check equipment and PPE and record any maintenance required in accordance with manufacturers' specifications and OHS and company requirements Completed |
Evidence:
|
Store cleaned equipment and PPE to allow ready access and re-use in accordance with company requirements Completed |
Evidence:
|
Transport and store chemicals in accordance with manufacturers' specifications and OHS and company requirements Completed |
Evidence:
|
Dispose of all collected waste in accordance with work order, manufacturers' specifications and environmental, legislative, OHS and company requirements Completed |
Evidence:
|
Treat exposed skin to remove any contamination in accordance with manufacturers' specifications and OHS and company requirements Completed |
Evidence:
|
Complete documentation
|
|
Prepare and issue required certificates and notices in accordance with environmental and legislative requirements Completed |
Evidence:
|
Complete and distribute company documentation in accordance with legislative and company requirements Completed |
Evidence:
|
Monitor effectiveness of management plan
|
|
Establish a periodic contact schedule with the client in accordance with company requirements Completed |
Evidence:
|
Maintain regular liaison with the client to monitor the effectiveness of the timber pest management plan in accordance with company requirements Completed |
Evidence:
|