The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to use automated paving guidance systems
|
|
Access, interpret and apply automated paving guidance systems documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Select and check for faults to plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Setup automated paving guidance system
|
|
Setup prisms within site tolerances and according to manufacturer’s specifications Completed |
Evidence:
|
Locate survey equipment according to worksite and manufacturer’s specifications Completed |
Evidence:
|
Identify and establish control points and theodolite positions for planned operation Completed |
Evidence:
|
Verify survey model is consistent with worksite plans Completed |
Evidence:
|
Calibrate paver to tolerances within manufacturers and worksite specifications Completed |
Evidence:
|
Operate automated paving guidance system (AGPS)
|
|
Set APGS controls to automatic control settings Completed |
Evidence:
|
Check signal inputs and automated control is operational Completed |
Evidence:
|
Check freshly paved concrete for conformance against worksite model Completed |
Evidence:
|
Conduct paver/APGS adjustments during operation Completed |
Evidence:
|
Reposition total station as required Completed |
Evidence:
|
Monitor movements and hazards and identify and communicate changes to the work environment during the work process Completed |
Evidence:
|
Conduct shutdown operations
|
|
Confirm instructions from supervisor prior to shutdown procedure Completed |
Evidence:
|
Shutdown APGS Completed |
Evidence:
|
Lower sensors on paver Completed |
Evidence:
|
Clean, check, maintain and store total stations Completed |
Evidence:
|
Plan and prepare to use automated paving guidance systems
|
|
Access, interpret and apply automated paving guidance systems documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, read, interpret, clarify and confirm work requirements Completed |
Evidence:
|
Identify and address potential risks, hazards and environmental issues, and implement control measures Completed |
Evidence:
|
Select and wear correct personal protective equipment appropriate for work activities Completed |
Evidence:
|
Select and check for faults to plant, tools and equipment to carry out tasks Completed |
Evidence:
|
Setup automated paving guidance system
|
|
Setup prisms within site tolerances and according to manufacturer’s specifications Completed |
Evidence:
|
Locate survey equipment according to worksite and manufacturer’s specifications Completed |
Evidence:
|
Identify and establish control points and theodolite positions for planned operation Completed |
Evidence:
|
Verify survey model is consistent with worksite plans Completed |
Evidence:
|
Calibrate paver to tolerances within manufacturers and worksite specifications Completed |
Evidence:
|
Operate automated paving guidance system (AGPS)
|
|
Set APGS controls to automatic control settings Completed |
Evidence:
|
Check signal inputs and automated control is operational Completed |
Evidence:
|
Check freshly paved concrete for conformance against worksite model Completed |
Evidence:
|
Conduct paver/APGS adjustments during operation Completed |
Evidence:
|
Reposition total station as required Completed |
Evidence:
|
Monitor movements and hazards and identify and communicate changes to the work environment during the work process Completed |
Evidence:
|
Conduct shutdown operations
|
|
Confirm instructions from supervisor prior to shutdown procedure Completed |
Evidence:
|
Shutdown APGS Completed |
Evidence:
|
Lower sensors on paver Completed |
Evidence:
|
Clean, check, maintain and store total stations Completed |
Evidence:
|