The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare
|
|
Access, interpret and apply compliance documentation relevant to installing cure in-place linings for existing pipeline systems Completed |
Evidence:
|
Obtain, confirm and apply work instructions, including plans, specifications, quality requirements and operational details to the allotted task Completed |
Evidence:
|
Obtain and confirm safety requirements from the site safety plan and organisational policies and procedures, and apply to the allotted task Completed |
Evidence:
|
Identify, obtain and implement signage requirements from the project traffic management plan Completed |
Evidence:
|
Ensure plant, tools and equipment selected to carry out tasks are consistent with the requirements of the job, check for serviceability and rectify or report any faults Completed |
Evidence:
|
Identify and confirm environmental protection requirements from the project environmental management plan, and apply to the allotted task Completed |
Evidence:
|
Perform site survey
|
|
Notify and obtain approval of property owners and occupiers for entry onto their property Completed |
Evidence:
|
Determine site conditions by visual inspection, plans, discussion with land owners and information from service utilities Completed |
Evidence:
|
Located Underground utilities Completed |
Evidence:
|
Maintain system serviceability during rehabilitation works in accordance with asset owners' policies, allowable duration of service interruption, and project specifications Completed |
Evidence:
|
Survey and record existing site conditions Completed |
Evidence:
|
Initiate rehabilitation work
|
|
Prepare entry and exit pits where specified in accordance with site and OHS requirements Completed |
Evidence:
|
Follow confined space entry procedures Completed |
Evidence:
|
Monitor installation process and finished product to ensure conformity to the design requirements in accordance with manufacturer's specifications and project specifications Completed |
Evidence:
|
Complete cure in-place lining Complete cure in-place lining
|
|
Determine fault with the aid of plans, drawings, CCTV recordings or other mechanisms Completed |
Evidence:
|
Select resin impregnated liners appropriate to the fault Completed |
Evidence:
|
Apply pressure cleaning to the designated location Completed |
Evidence:
|
Install cure in-place lining material to comply with design requirements and manufacturer's specifications Completed |
Evidence:
|
Conduct curing process to comply with manufacturer's specifications Completed |
Evidence:
|
Correctly secure and seal termination at ends of process in accordance with manufacturer's specifications Completed |
Evidence:
|
Open junctions for inspection and operation Completed |
Evidence:
|
Monitor installation process and finished product to ensure conformity to the design requirements in accordance Completed |
Evidence:
|
Clean up
|
|
Clear work area and dispose of or recycle materials in accordance with project environmental management plan Completed |
Evidence:
|
Clean, check, maintain and store plant, tools and equipment Completed |
Evidence:
|