NTISthis.com

Evidence Guide: RIINHB301E - Set up and prepare for drilling operations

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIINHB301E - Set up and prepare for drilling operations

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for drilling operations

  1. Obtain, interpret and confirm work requirements
  2. Access, interpret and apply drilling operations documentation, and confirm work activity is compliant
  3. Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
  4. Select and wear personal protective equipment required for work activities
  5. Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received
  6. Identify and determine location and nature of any installed services near or crossing the proposed drill plan
  7. Identify and obtain all necessary permits and consents
  8. Develop contingency plans for changes in geological conditions
  9. Obtain and interpret emergency procedures and identify steps required in case of fires, accidents and other emergencies
  10. Check all required personnel, equipment and supplies are available
  11. Check equipment is in operational condition, and address identified issues according to manufacturer specifications
  12. Erect or place safety barriers where needed according to safety requirements
  13. Check all modes of communication according to work requirements and workplace procedures
  14. Select suitable lay down areas for separate storage of chemicals and fuels or other incompatible items according to safety requirements
  15. Select locations for ancillary equipment that provide maximum efficiency and minimal risk to personnel
Obtain, interpret and confirm work requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Access, interpret and apply drilling operations documentation, and confirm work activity is compliant

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and wear personal protective equipment required for work activities

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and determine location and nature of any installed services near or crossing the proposed drill plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and obtain all necessary permits and consents

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Develop contingency plans for changes in geological conditions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain and interpret emergency procedures and identify steps required in case of fires, accidents and other emergencies

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check all required personnel, equipment and supplies are available

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check equipment is in operational condition, and address identified issues according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Erect or place safety barriers where needed according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check all modes of communication according to work requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select suitable lay down areas for separate storage of chemicals and fuels or other incompatible items according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select locations for ancillary equipment that provide maximum efficiency and minimal risk to personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up drill and equipment

  1. Carry out prestart and start-up procedures according to manufacturer specifications and workplace procedures
  2. Ensure a solid foundation for the rig
  3. Interpret plans and position equipment accurately
  4. Stabilise drill according to manufacturer specifications
  5. Align and secure mast at correct angle according to manufacturer specifications and drill plan
  6. Position ancillary equipment accurately according to work requirements
  7. Recognise symptoms of problem according to workplace procedures
  8. Identify and isolate causes and determine solution
  9. Implement solution if within scope of authority and competence
  10. Seek help if problem is too complex
  11. Implement solution as directed
Carry out prestart and start-up procedures according to manufacturer specifications and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ensure a solid foundation for the rig

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Interpret plans and position equipment accurately

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stabilise drill according to manufacturer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Align and secure mast at correct angle according to manufacturer specifications and drill plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Position ancillary equipment accurately according to work requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Recognise symptoms of problem according to workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and isolate causes and determine solution

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Implement solution if within scope of authority and competence

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Seek help if problem is too complex

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Implement solution as directed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

set up and prepare for drilling operations on at least two occasions, including:

coordinating drill team members and activities

determining location and nature of any installed services near or crossing the proposed drill plan

identifying and obtaining all necessary permits and consents

selecting locations for storage of chemicals/fuels/incompatible items/ancillary equipment

ensuring a solid foundation for the rig

stabilising drill

aligning and securing mast at correct angle.

During the above, the candidate must:

locate and apply required documentation, policies and procedures

implement the requirements, procedures and techniques for the setting up and preparing for drilling operations, including:

operating ancillary equipment

interpreting graphical representation, including maps and diagrams relevant to drilling operations

using appropriate instruments to measure:

volume

quantities

mass

weight

length

applying basic geometry to interpret depth, direction and azimuth of a hole

work with others to set up and prepare for drilling operations that meet required outcomes, including:

complying with written and verbal reporting requirements and procedures

communicating with others to receive and clarify work instructions

communicating with others to determine coordination requirements prior to commencing and during work activities.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

key policies, procedures and established requirements for setting up and preparing for drilling operations, including those for:

work health and safety

emergencies

hazard management

operating drill rig

housekeeping

environmental practices, including:

controlling flow off site

disposing of waste

ensuring pad is suitable for drilling

preventing spread of contaminants

original equipment manufacturer (OEM) specifications

safe work practices

mathematical skills, including:

addition

subtraction

multiplication

division

converting between metric and imperial

using calculating tools

estimating skills, including mental arithmetic, visualisation of size and quantity

fault finding and troubleshooting techniques

team work principles

communication systems and procedures for complying with site radio requirements, including a two-way radio.