The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for installation of product pipe
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain, confirm and apply work instructions for the allocated task Completed |
Evidence:
|
Identify, manage and report all potential hazards Completed |
Evidence:
|
Resolve coordination requirements with others at the site prior to commencing and during work activities Completed |
Evidence:
|
Raise alarm/report as required according to site procedures Completed |
Evidence:
|
Install product pipe
|
|
Select appropriate equipment to install product Completed |
Evidence:
|
Lock out machine Completed |
Evidence:
|
Check and connect necessary equipment Completed |
Evidence:
|
Locate product feed to prevent damage and within breakover limitations Completed |
Evidence:
|
Check all safety precautions are in place and restart machine Completed |
Evidence:
|
Install product, removing drill stem sections to procedure as required Completed |
Evidence:
|
Monitor and interpret all gauge/dial readings Completed |
Evidence:
|
Monitor product feed Completed |
Evidence:
|
Maintain communication with all relevant personnel Completed |
Evidence:
|
Take required actions to achieve satisfactory product installation as required Completed |
Evidence:
|
Maintain drill log and reports as required Completed |
Evidence:
|
Maintain equipment
|
|
Monitor wear on drill stem, particularly threads Completed |
Evidence:
|
Dress damaged threads or replace drill stem as required Completed |
Evidence:
|
Check all equipment and hoses Completed |
Evidence:
|
Clean all equipment on completion of installation, ensuring environmental controls are followed Completed |
Evidence:
|
Rotate drill stems in stack Completed |
Evidence:
|
Keep site safe for all possible users for the total duration of the job Completed |
Evidence:
|
Leave site in a safe and tidy condition which complies with all relevant regulations Completed |
Evidence:
|
Respond to problems
|
|
Identify possible problems in equipment or process Completed |
Evidence:
|
Determine problems needing action Completed |
Evidence:
|
Determine possible fault causes Completed |
Evidence:
|
Rectify problem using appropriate solution within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|
Report problems outside area of responsibility to designated person Completed |
Evidence:
|