The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for drilling
|
|
Access, interpret and apply compliance documentation relevant to the work activity Completed |
Evidence:
|
Obtain, confirm and apply shift changeover details, geo-technical reports and drill plan for the allocated task Completed |
Evidence:
|
Inspect and assess site conditions to identify and manage possible scaling requirements, misfires and other hazards and potential risk Completed |
Evidence:
|
Resolve coordination requirements with others at the site prior to commencing and during work activities Completed |
Evidence:
|
Select and wear personal protective equipment appropriate for work activities Completed |
Evidence:
|
Set up for drilling
|
|
Set up the raise bore drill rig site Completed |
Evidence:
|
Locate the drill rig on the prepared pad and position and check alignment as specified according to drill plan Completed |
Evidence:
|
Secure drill rig to the pad using recommended equipment and anchors Completed |
Evidence:
|
Stand drill rig in specified position according to drilling plan Completed |
Evidence:
|
Connect components to drill rig Completed |
Evidence:
|
Test raise drill for correct, safe operation Completed |
Evidence:
|
Calculate rods needed to drill to depth, and set up drill rack Completed |
Evidence:
|
Load drill rods and equipment onto drill rack Completed |
Evidence:
|
Conduct equipment pre-start checks to ensure equipment is safe and ready to use Completed |
Evidence:
|
Locate collar and drill pilot hole
|
|
Inspect and assemble collaring starter equipment Completed |
Evidence:
|
Install dust suppression and extraction systems Completed |
Evidence:
|
Confirm and set drill direction accurately and collar hole as specified in the drill plan Completed |
Evidence:
|
Install assemblies in collared hole to allow pilot hole drilling to be carried Completed |
Evidence:
|
Drill and monitor progress of pilot hole
|
|
Inspect job-site for safe working conditions Completed |
Evidence:
|
Maintain safety of driller and surrounding personnel Completed |
Evidence:
|
Interpret drill plans and drill holes to design Completed |
Evidence:
|
Operate equipment safely within working environment limitations and ground conditions Completed |
Evidence:
|
Monitor ground conditions and adjust drilling techniques and components to maintain efficient drilling operations Completed |
Evidence:
|
Monitor drilling progress using appropriate equipment indicators Completed |
Evidence:
|
Carry out and monitor drill "break through" procedures and inspect break through Completed |
Evidence:
|
Remove housing assemblies Completed |
Evidence:
|
Ream raise bore
|
|
Coordinate personnel to attach the reaming head to drill string Completed |
Evidence:
|
Communicate with appropriate personnel to ensure safe removal of raise bore cuttings Completed |
Evidence:
|
Maintain safety of driller and surrounding personnel Completed |
Evidence:
|
Operate equipment safely within working environment limitations and ground conditions Completed |
Evidence:
|
Monitor ground conditions and adjust reaming techniques to maintain efficient drilling operations Completed |
Evidence:
|
Diagnose and take appropriate action to manage reaming problems and advise appropriate personnel Completed |
Evidence:
|
Remove and store reamer Completed |
Evidence:
|
Pack-up drill site
|
|
De-rig equipment Completed |
Evidence:
|
Confirm equipment is ready for transport Completed |
Evidence:
|
Carry out operator maintenance
|
|
Carry out shutdown procedures Completed |
Evidence:
|
Service and make minor adjustments to equipment Completed |
Evidence:
|
Visually inspect equipment and report faults and make equipment available for routine operational servicing Completed |
Evidence:
|
Carry out housekeeping activities
|
|
Clean equipment to maintain condition of equipment and ensure safe and efficient operations Completed |
Evidence:
|
Clear site of debris and excess stores Completed |
Evidence:
|
Clean and store auxiliary service equipment Completed |
Evidence:
|
Complete all required documentation clearly, concisely and on time Completed |
Evidence:
|
Pass on end of shift information to oncoming shift Completed |
Evidence:
|