The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for down-hole hammer drilling
|
|
Access, interpret and apply drilling documentation and ensure the work activity is compliant Completed |
Evidence:
|
Obtain, confirm, clarify, confirm and apply work instructions Completed |
Evidence:
|
Identify, manage and report verbally or in writing all potential hazards and risks Completed |
Evidence:
|
Resolve coordination requirements with others prior to commencing and during work activities Completed |
Evidence:
|
Select and wear correct personal protective equipment, tools and equipment to carry out tasks, check for serviceability and rectify or report any faults Completed |
Evidence:
|
Check restraining devices on all pressure hoses Completed |
Evidence:
|
Fit/replace restraining devices on pressure hoses Completed |
Evidence:
|
Raise alarm/report as required Completed |
Evidence:
|
Operate down hole hammer drill
|
|
Select appropriate rod type, thread form and drill string components for job Completed |
Evidence:
|
Measure and select appropriate bit for the job Completed |
Evidence:
|
Use rod handling equipment safely and correctly Completed |
Evidence:
|
Add/break out and remove drill rods/pipes and down hole equipment Completed |
Evidence:
|
Weight/feed/rotate drill at right rate for optimum penetration Completed |
Evidence:
|
Adjust air pressure to achieve required hole clearance Completed |
Evidence:
|
Measure line string and calculate depth of hole Completed |
Evidence:
|
Identify hole conditions, assess requirements of dust control fluids Completed |
Evidence:
|
Select suitable ingredients/fluids Completed |
Evidence:
|
Prepare/monitor the preparation of required fluids Completed |
Evidence:
|
Use dust control fluids to achieve required result Completed |
Evidence:
|
Monitor equipment wear Completed |
Evidence:
|
Check all equipment and hoses Completed |
Evidence:
|
Disassemble, inspect and reassemble down hole hammers Completed |
Evidence:
|
Replace/adjust and report damaged/worn parts Completed |
Evidence:
|
Undertake bit sharpening Completed |
Evidence:
|
Monitor operation and chips/sample/air return Completed |
Evidence:
|
Identify possible problems in equipment or process Completed |
Evidence:
|
Clear blockages safely Completed |
Evidence:
|
Determine other problems and maintenance tasks needing action Completed |
Evidence:
|
Determine possible fault causes Completed |
Evidence:
|
Rectify problem using appropriate solution within area of responsibility Completed |
Evidence:
|
Follow through items initiated until final resolution has occurred Completed |
Evidence:
|
Verbally or in writing report problems outside area of responsibility to designated person Completed |
Evidence:
|