NTISthis.com

Evidence Guide: RIIUND303E - Operate winder for shaft sinking

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

RIIUND303E - Operate winder for shaft sinking

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for operating a winder for shaft sinking

  1. Obtain, interpret, confirm and clarify shift changeover details
  2. Access, interpret and apply documentation required for operating a winder for shaft sinking
  3. Select and wear personal protective equipment according to site requirements
  4. Perform equipment and work area prestart checks according to site requirements
  5. Check records for outstanding maintenance and inspections and recorded defects and respond according to site requirements
  6. Identify and address potential risks, hazards and environmental issues and implement control measures according to site requirements
  7. Carry out start-up procedures and confirm area is clear for operations according to site requirements
  8. Apply dust suppression and extraction methods according to site requirements
  9. Confirm control cabin meets site requirements
Obtain, interpret, confirm and clarify shift changeover details

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Access, interpret and apply documentation required for operating a winder for shaft sinking

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and wear personal protective equipment according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform equipment and work area prestart checks according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check records for outstanding maintenance and inspections and recorded defects and respond according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and address potential risks, hazards and environmental issues and implement control measures according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out start-up procedures and confirm area is clear for operations according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply dust suppression and extraction methods according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm control cabin meets site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct shaft sinking using manual winder

  1. Communicate with relevant personnel within scope of own role
  2. Confirm kibble is ready for operation
  3. Initiate the system, follow start-up procedures and operate winder according manufacturer specifications, site requirements, and directions from person in charge of cage
  4. Monitor and manage winder performance using appropriate indicators
  5. Adjust speed and movement as required
  6. Operate winder/s required for shaft sinking operations according manufacturer specifications and site requirements
  7. Carry out shutdown procedures according manufacturer specifications and site requirements
Communicate with relevant personnel within scope of own role

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm kibble is ready for operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Initiate the system, follow start-up procedures and operate winder according manufacturer specifications, site requirements, and directions from person in charge of cage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor and manage winder performance using appropriate indicators

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjust speed and movement as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate winder/s required for shaft sinking operations according manufacturer specifications and site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out shutdown procedures according manufacturer specifications and site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out winder inspections

  1. Isolate and prove isolation of equipment according manufacturer specifications and site requirements
  2. Inspect winder and auxiliary equipment and report faults/defects according to site requirements
  3. Prepare winder for routine servicing according to manufacturer specifications and site requirements
  4. Complete documentation according to site requirements
  5. Pass on end of shift information and hand over control to oncoming shift according to site requirements
  6. Confirm control room meets site requirements
Isolate and prove isolation of equipment according manufacturer specifications and site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Inspect winder and auxiliary equipment and report faults/defects according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare winder for routine servicing according to manufacturer specifications and site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete documentation according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pass on end of shift information and hand over control to oncoming shift according to site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm control room meets site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge

The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:

operate a manual winder for shaft sinking on at least two occasions, including:

completing start-up and shutdown procedures

applying dust suppression and extraction methods

energising the system

adjusting speed and movement

monitoring and managing the winder performance using indicators

isolating and inspecting winder

confirming, checking and responding to confirm control cabin meets environmental and ergonomic requirements.

During the above, the candidate must:

locates and applies relevant legislation, documentation, policies and procedures

implement the requirements, procedures and techniques for operating winders for shaft sinking, including:

selecting and using the required tools and equipment

conducting equipment and work area prestart checks

identifying, addressing, recording and reporting defects, hazards and risks and environmental issues

confirming kibble is ready for operation

work effectively with others to operate manual winders in a way that meets required outcomes, including:

organising work activities to meet task requirements

communicating clearly and concisely with others to receive and clarify work instructions

complying with reporting requirements and procedures

determining coordination requirements throughout work activities.

The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:

key legislation required to operate winders for shaft sinking, including those relating to:

mining safety and health

mine inspection

work health and safety

explosives

key policies, procedures and documentation required to operate winders for shaft sinking

techniques for operating manual winders, including those for:

start-up, including:

conducting pre-start inspections, checks and tests

setting winding mode

checking advisory signals indicating impending movement of conveyance

carrying out test-winding-cycle

energising the system, including:

activating power supply/start diesel motor-generator

running up hydraulic/pneumatic and relevant auxiliary equipment

checking fault indicators

monitoring and managing cage performance, relating to the following:

duration of operation

efficient and safe operating speed

operating limitations

type of activities performed

weight and/or load limitations

shutdown, including:

de-activating power/stopping diesel prime mover

shutting down motor-generator set/exciters/exhaust and cooling fans/hydraulic drive

shutting down hydraulic/pneumatic and relevant auxiliary equipment

cleaning

characteristics, technical capabilities and limitations of winder types, systems, operations and relevant equipment, including:

isolation and permit-to work systems and procedures

trip and fault procedures and abnormal conditions

shaft configuration and construction

shaft services and installations, including:

pipes

cables

ladders

communication system between sinking operations and winder

shaft ventilation systems

indicators, including,

computer indicators

personnel cage/skip operations

winding engines and head frames

stages

kibble/skip/cage

power supplies and equipment

services

fans/pumps/compressors/super-sucker

shaft doors

scrolls/tipple

conveyance guide systems

crossheads

techniques for identifying of defects relevant to sinking operations, including through inspection and observation

techniques for dust suppression and extraction

techniques for identifying accessing and using in-shaft communications equipment

principles and techniques for identifying and responding to relevant hazards and emergencies

site requirements for processing maintenance records and reporting requirements

techniques for coordinating and communicating job activities with others.