The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare for fluid operations
|
|
Access, interpret and apply compliance documentation and ensure the work activity is complaint Completed |
Evidence:
|
Obtain, read, clarify/confirm and apply work instructions Completed |
Evidence:
|
Identify and report all potential hazards Completed |
Evidence:
|
Select and use/wear personal protective equipment and protective clothing Completed |
Evidence:
|
Coordinate job requirements with others at the site Completed |
Evidence:
|
Confirm permits required and prepare written permits to work Completed |
Evidence:
|
Maintain and repair fluid pumps
|
|
Check pony rod clamp is fitted correctly Completed |
Evidence:
|
Lubricate gear end of pump and check oil levels in gear end of pump Completed |
Evidence:
|
Identify faults and report immediately Completed |
Evidence:
|
Identify, record and/or report requirement for repair or maintenance of mud pumps Completed |
Evidence:
|
Maintain and replace defective swabs, liner, valves, seats, gauges and wear plates of the fluid end of pump Completed |
Evidence:
|
Operate and monitor fluid pumps
|
|
Carry out pre start checks Completed |
Evidence:
|
Set or adjust all critical equipment such as pop-off valve and or choke manifold/s to safe operating parameters Completed |
Evidence:
|
Test operational function of all valves and/or choke manifold/s in the fluid system Completed |
Evidence:
|
Pressure test system, record in writing and communicate issues identified Completed |
Evidence:
|
Confirm and identify flow path required for operation and pumping parameters Completed |
Evidence:
|
Visually inspect and listen to mud pumps for abnormalities Completed |
Evidence:
|
Operate, maintain and repair fluid pumps
|
|
Check safety lines/restraints are in place, secure and functional Completed |
Evidence:
|
Engage and/or adjust appropriate equipment as directed by supervisor Completed |
Evidence:
|
Clean all equipment and visually inspect for leaks and proper operation, in accordance with specifications Completed |
Evidence:
|
Identify faults and report immediately Completed |
Evidence:
|
Identify, record in writing and report requirement for repair or maintenance of fluid conditioning equipment Completed |
Evidence:
|
Replace screens on shakers or cones on desilters/desanders Completed |
Evidence:
|
Replace bags/pods in filtration unit/s Completed |
Evidence:
|
Perform periodic or scheduled preventative maintenance on all fluid treatment units Completed |
Evidence:
|
Operate and service transfer valves in fluid pits/tanks or fluid pumps
|
|
Correctly align valves Completed |
Evidence:
|
Lubricate valve stems Completed |
Evidence:
|
Clean and inspect transfer valves Completed |
Evidence:
|
Replace or repair defective parts Completed |
Evidence:
|
Identify and act upon variations in circulating medium during operation
|
|
Monitor, adjust and report pit/tank level Completed |
Evidence:
|
Monitor and report fluid properties Completed |
Evidence:
|
Monitor and report size of cuttings Completed |
Evidence:
|
Monitor and report volume of fluid returns Completed |
Evidence:
|
Prepare for emergency situations Completed |
Evidence:
|