The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan work for current working conditions
|
|
Job hazards are identified and required action is taken to minimise, control or eliminate identified hazards Completed |
Evidence:
|
Traffic flow and work area conditions are constantly assessed and anticipated to ensure no injury to people, or damage to equipment, loads or facilities Completed |
Evidence:
|
Load characteristics are taken into account to ensure appropriate attachments are used to transport load as required Completed |
Evidence:
|
Safe working load (SWL) or working load limit (WLL) is calculated Completed |
Evidence:
|
Occurrences in work area that affect safety and efficiency of operations are reported to appropriate personnel Completed |
Evidence:
|
Use controls and equipment operating systems to manage moving unit and accessory operations
|
|
Equipment is prepared and appropriate attachment is fitted Completed |
Evidence:
|
Gear and operational levers are checked to ensure they are in neutral position prior to inserting ignition key and starting engine Completed |
Evidence:
|
Engine is started in accordance with manufacturer guidelines to bring engine up to speed Completed |
Evidence:
|
Instruments and gauges are monitored during start up and operations to ensure operation is within manufacturer specifications and workplace procedures Completed |
Evidence:
|
Engine power is managed to ensure efficiency of equipment movement and economy of equipment operations Completed |
Evidence:
|
Equipment operations are conducted in accordance with manufacturer specified torque range Completed |
Evidence:
|
Faults or damage to equipment are immediately reported to appropriate personnel in accordance with workplace procedures Completed |
Evidence:
|
Locate load and identify load characteristics
|
|
Load is located and identified in accordance with workplace procedures Completed |
Evidence:
|
Loading and unloading plans are followed to ensure efficiency and safety of operations Completed |
Evidence:
|
Load characteristics are taken into account to ensure appropriate loading and unloading workplace procedures are followed Completed |
Evidence:
|
Hazardous goods are identified and relevant procedures are taken into account when planning and conducting work Completed |
Evidence:
|
Load weight and dimensions are established within equipment capacity Completed |
Evidence:
|
Move materials and loads
|
|
Equipment is manoeuvred and positioned using smooth and controlled movements Completed |
Evidence:
|
Manoeuvres are made within equipment limits and in accordance with manufacturer specifications Completed |
Evidence:
|
Materials are moved ensuring no injury to personnel or damage to equipment or goods Completed |
Evidence:
|
Monitor and operate controls
|
|
Equipment controls are monitored and operated in accordance with manufacturer operating instructions Completed |
Evidence:
|
Control systems are interpreted and acted on in accordance with statutory authority regulations, manufacturer guidelines and site workplace procedures Completed |
Evidence:
|
Control faults are identified and reported in accordance with manufacturer instructions and workplace guidelines Completed |
Evidence:
|
Stop, park and secure equipment
|
|
Equipment is brought to a controlled halt in accordance with manufacturer guidelines Completed |
Evidence:
|
Equipment is parked without injury to personnel or damage to equipment, loads or facilities in accordance with company procedures Completed |
Evidence:
|
Equipment is secured on a flat, even surface, clear of doorways, aisles, access ways or blind corners in accordance with securing procedures for appropriate equipment Completed |
Evidence:
|
Problems, faults or malfunctions are reported and/or rectified in accordance with regulatory requirements and workplace procedures Completed |
Evidence:
|