The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan work
|
|
Liquid transfer method is identified for loading and unloading as gravity or pressure Completed |
Evidence:
|
Dangerous or hazardous (including regulated waste) or other materials requiring specialised handling are identified and relevant procedures are taken into account when planning the work Completed |
Evidence:
|
Precautions are undertaken to eliminate all ignition sources Completed |
Evidence:
|
Traffic flow, vehicle positioning and work area conditions are assessed to ensure safe operation and no injury to people, or damage to equipment, loads or facilities Completed |
Evidence:
|
Characteristics of the liquid, transfer and holding method are taken into account when evaluating procedural requirements, special precautions for method, equipment and, where applicable, appropriate attachments to transfer the load Completed |
Evidence:
|
Potential occurrences in the work area that may affect the safety and efficiency of operations are reported to the appropriate personnel Completed |
Evidence:
|
Liquid transfer is planned, taking into account the requirements of the load, transfer method, storage facility and transport mode, load weight, volume and viscosity and the capacity of the equipment Completed |
Evidence:
|
Load is checked prior to and at the completion of transfer to ensure ullage and/or maximum permitted capacity complies with ADG Code Completed |
Evidence:
|
Adjustments are made to process to accommodate special requirements such as temperature control, combustion, etc. Completed |
Evidence:
|
Required personal protective equipment, signage, barriers and special precautions are identified in the plan and utilised Completed |
Evidence:
|
Procedures to deal with spills, leakages and ruptures are identified Completed |
Evidence:
|
Transfer material
|
|
Equipment is prepared and any appropriate attachments fitted Completed |
Evidence:
|
Equipment controls are checked for correct operational status before commencing transfer Completed |
Evidence:
|
Instruments and gauges are monitored during operations to ensure that operation is within manufacturers specifications and workplace schedule and safety requirements Completed |
Evidence:
|
Speed of operation is managed for safety and efficiency of materials movement and equipment operations Completed |
Evidence:
|
Faults or damage to equipment are immediately reported to the appropriate personnel Completed |
Evidence:
|
Monitor and operate controls
|
|
Equipment controls are monitored and operated in accordance with manufacturers operating instructions Completed |
Evidence:
|
Control systems are monitored in accordance with statutory authority regulations, manufacturers guidelines and site operating procedures Completed |
Evidence:
|
Materials are moved ensuring no injury to personnel or damage to equipment or goods Completed |
Evidence:
|
Faults are identified and reported in accordance with workplace procedures Completed |
Evidence:
|
Complete operations
|
|
Equipment is shut down within manufacturers guidelines without injury to personnel or damage to equipment, loads or facilities in accordance with workplace procedures Completed |
Evidence:
|
Clean up methods for transfer equipment are completed following workplace procedures Completed |
Evidence:
|
Equipment is secured in accordance with securing procedures for the appropriate equipment Completed |
Evidence:
|
Workplace documentation is completed and filed following workplace procedures Completed |
Evidence:
|