The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan work for the prevailing working conditions
|
|
Traffic flow, weather and work area conditions are constantly assessed and anticipated to allow safe operation to ensure no injury to people, or damage to equipment, loads or facilities Completed |
Evidence:
|
Load characteristics are taken into account to ensure appropriate attachments/gear are used to move the load as required Completed |
Evidence:
|
Occurrences in the work area that may affect the safety and efficiency of operations are reported to appropriate personnel Completed |
Evidence:
|
Use controls and operating systems to manage the operation of the equipment
|
|
Equipment is prepared and appropriate attachments are fitted as required Completed |
Evidence:
|
Gear and operational levers are checked to ensure they are in the neutral position prior to inserting ignition key and starting engine Completed |
Evidence:
|
Engine is started in accordance with manufacturer guidelines to bring engine to speed Completed |
Evidence:
|
Instruments and gauges are monitored during start up and operations to ensure operation is within manufacturer specifications, and workplace and regulatory safety requirements Completed |
Evidence:
|
Engine power is managed for efficiency of equipment movement and economy of equipment operations Completed |
Evidence:
|
Equipment operations are conducted within manufacturer specified torque range Completed |
Evidence:
|
Faults or damage to equipment are immediately reported to appropriate personnel Completed |
Evidence:
|
Locate load and identify load characteristics
|
|
Load is located and identified in accordance with instructions Completed |
Evidence:
|
Requirements for safe working load (SWL) and working load limit (WLL) of gantry equipment are identified Completed |
Evidence:
|
Load weight and dimensions are checked to ensure they fall within equipment capacity Completed |
Evidence:
|
Loading and unloading plans are followed to ensure efficiency and safety of operations Completed |
Evidence:
|
Load characteristics are taken into account to ensure appropriate loading and unloading procedures are followed Completed |
Evidence:
|
Hazardous cargo is identified and relevant procedures are taken into account when planning and conducting work Completed |
Evidence:
|
Safely move load
|
|
Equipment is operated and positioned using smooth and controlled movements Completed |
Evidence:
|
Manoeuvres are within equipment limits and in line with manufacturer specifications Completed |
Evidence:
|
Load is moved ensuring no injury to personnel or damage to equipment or cargo Completed |
Evidence:
|
Continuous communication is maintained with personnel assisting the operator in the load movement operations using appropriate communications technology and procedures Completed |
Evidence:
|
In an incident or emergency, equipment is immediately stopped and workplace emergency procedures are followed Completed |
Evidence:
|
Safety incidents and emergencies are reported in accordance with workplace procedures and regulatory requirements Completed |
Evidence:
|
Monitor and operate controls
|
|
Equipment controls are monitored and operated in accordance with manufacturer operating instructions Completed |
Evidence:
|
Control systems are confirmed and acted on in accordance with regulatory requirements, manufacturer guidelines and workplace operating procedures Completed |
Evidence:
|
Control faults are identified and reported in accordance with enterprise guidelines Completed |
Evidence:
|
Hazards in the work area are identified and appropriate measures are adopted to control the risks in accordance with regulatory requirements and workplace procedures Completed |
Evidence:
|
Stop, shut down and secure equipment
|
|
Equipment is brought to a controlled halt and is shut down without injury to personnel or damage to equipment, loads or facilities in accordance with manufacturer guidelines and workplace procedures Completed |
Evidence:
|
Equipment is secured in accordance with manufacturer instructions and workplace procedures Completed |
Evidence:
|