The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine job requirements |
|
Completed |
Evidence:
|
Weld repairs are located |
|
Completed |
Evidence:
|
Defects relating to rail surface profile and condition in switches and crossings are identified |
|
Completed |
Evidence:
|
Hazards are identified, risks are assessed and control measures are implemented |
|
Completed |
Evidence:
|
Appropriate equipment is selected |
|
Completed |
Evidence:
|
Appropriate repair method and/or profile is selected to ensure completed work will meet specifications |
|
Completed |
Evidence:
|
Site is cleared of obstructions and combustible material |
|
Completed |
Evidence:
|
Grind weld repair |
|
Completed |
Evidence:
|
Switch or crossing is ground to nominated profile after installation or welded repair using approved equipment in accordance with workplace procedures |
|
Completed |
Evidence:
|
Grinding equipment is operated safely in accordance with work health and safety (WHS)/occupational health and safety (OHS) and environmental requirements |
|
Completed |
Evidence:
|
Switch or crossing profile and alignment are measured to ensure compliance with acceptance standards |
|
Completed |
Evidence:
|
Rail surface condition is assessed for compliance with acceptance standards |
|
Completed |
Evidence:
|
Grind switch or crossing to repair surface defects |
|
Completed |
Evidence:
|
Switch or crossing is ground using approved equipment in accordance with workplace procedures |
|
Completed |
Evidence:
|
Grinding equipment is operated safely in accordance with WHS/OHS and environmental requirements |
|
Completed |
Evidence:
|
Finished surface is checked to ensure compliance with acceptance standards |
|
Completed |
Evidence:
|
Complete documentation |
|
Completed |
Evidence:
|
Required documentation procedures and processes are confirmed |
|
Completed |
Evidence:
|
Documentation is filled in legibly and proofread |
|
Completed |
Evidence:
|
Documentation is processed in accordance with workplace requirements |
|
Completed |
Evidence:
|