The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to enter an electrotechnology workplace
|
|
Work area access permits are obtained from appropriate person/s in accordance with workplace procedures Completed |
Evidence:
|
Relevant workplace WHS/OHS safety regulations and codes of practices are identified and followed when entering the electrotechnology work area |
|
Completed |
Evidence:
|
Safe work methods for controlling risks are obtained, read and applied prior to undertaking work activity in accordance with WHS/OHS workplace procedures |
|
Completed |
Evidence:
|
Preparation for electrical and non-electrical isolation is carried out to prevent creation of hazards from loss of machine/system/process control in accordance with WHS/OHS workplace procedures |
|
Completed |
Evidence:
|
Tools, equipment and chemicals required for the electrotechnology work are checked for safety and correct functionality in accordance with workplace procedures and regulatory requirements |
|
Completed |
Evidence:
|
Personal protective equipment (PPE) is worn appropriate to the electrotechnology work area and in accordance with workplace procedures |
|
Completed |
Evidence:
|
Apply safe electrotechnology working practices
|
|
Risk control work measures are implemented in accordance with WHS/OHS workplace procedures Completed |
Evidence:
|
Procedures for dealing with accidents, fires and emergencies are followed in accordance with workplace procedures, scope of responsibility and capabilities |
|
Completed |
Evidence:
|
Safe work methods are applied when working at heights including safe and effective use of safety equipment |
|
Completed |
Evidence:
|
Safe work methods are used when undertaking lifting, lowering, pushing, pulling, carrying or otherwise moving, holding or restraining workplace tasks in accordance with relevant code of practice |
|
Completed |
Evidence:
|
Safe work methods for removing an electric shock victim from a live electrical situation are demonstrated in accordance with workplace emergency management procedures |
|
Completed |
Evidence:
|
Working area is kept clean, neat and tidy in accordance with workplace housekeeping procedures |
|
Completed |
Evidence:
|
Follow electrotechnology workplace procedures for hazard identification and risk control
|
|
Hazards are identified, control measures implemented and reviewed through regular active participation in the consultation process with employer and other employees Completed |
Evidence:
|
Hazards in the work area are identified and reported to relevant person/s in accordance with workplace procedures |
|
Completed |
Evidence:
|
WHS/OHS documentation and incident records are completed in accordance with regulatory requirements and workplace procedures |
|
Completed |
Evidence:
|
Workplace instructions are followed in accordance with regulatory requirements and workplace procedures |
|
Completed |
Evidence:
|