The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to find and repair faults
|
|
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied Completed |
Evidence:
|
WHS/OHS risk control measures and workplace procedures are followed in preparation for the work |
|
Completed |
Evidence:
|
Scope of measuring and analysis systems fault is obtained from documentation and/or work supervisor |
|
Completed |
Evidence:
|
Advice is sought from the work supervisor to ensure work is coordinated effectively with others |
|
Completed |
Evidence:
|
Sources of materials required for work are determined in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Find and repair faults
|
|
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed Completed |
Evidence:
|
Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Apparatus is inspected and isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
Fault finding of measuring and analytical equipment and circuit is conducted using measured and calculated values of apparatus parameters in accordance with workplace procedures |
|
Completed |
Evidence:
|
Equipment components are dismantled, as required, and parts stored to protect against loss or damage in accordance with workplace procedures and relevant industry standards |
|
Completed |
Evidence:
|
Faulty components are rechecked and fault status confirmed |
|
Completed |
Evidence:
|
Faulty components are readjusted or replaced in accordance with workplace procedures |
|
Completed |
Evidence:
|
Repaired components are tested in accordance with workplace procedures |
|
Completed |
Evidence:
|
Apparatus is reassembled, inspected, tested and prepared for return to service |
|
Completed |
Evidence:
|
Unplanned situations are dealt with safely and with the approval of relevant person/s |
|
Completed |
Evidence:
|
Fault-finding and repair activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices |
|
Completed |
Evidence:
|
Complete and report fault-finding and repair activities
|
|
WHS/OHS work completion risk control measures and workplace procedures are followed Completed |
Evidence:
|
Work area is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Written justification is made for repairs to apparatus, components and materials in accordance with workplace procedures |
|
Completed |
Evidence:
|
Acceptance that the reported fault/s have been repaired is sought from relevant person/s in accordance with workplace procedures |
|
Completed |
Evidence:
|