The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to install small ELV WECS
|
|
Work health and safety (WHS)/occupational health and safety (OHS) processes and procedures for relevant work area are identified and applied in accordance with workplace procedures Completed |
Evidence:
|
WHS/OHS risks are identified and workplace procedures for risk control are applied in preparation for work |
|
Completed |
Evidence:
|
Risks/hazards are identified, assessed, reported to relevant person/s and control measures implemented |
|
Completed |
Evidence:
|
System installation is planned in consultation with others impacted by the work and sequenced appropriately |
|
Completed |
Evidence:
|
Nature and location of the work are determined from documentation or relevant person/s to determine the scope of work |
|
Completed |
Evidence:
|
Sitting limitations and customer system requirements are identified in consultation with the customer |
|
Completed |
Evidence:
|
Suitable system components are specified and selected in accordance with workplace procedures |
|
Completed |
Evidence:
|
Location of system components is planned within the constraints of the building structure and regulations |
|
Completed |
Evidence:
|
Instructions for coordinating work with others is obtained from relevant person/s and applied |
|
Completed |
Evidence:
|
Materials and components required are obtained in accordance with workplace procedures, pre-assembled, where necessary, and checked against job requirements |
|
Completed |
Evidence:
|
Materials and components are prepared for transport to the site and transport is arranged |
|
Completed |
Evidence:
|
Tools, equipment and testing devices required are obtained in accordance with workplace procedures and checked for correct operation and safety |
|
Completed |
Evidence:
|
Preparatory work is checked to ensure no unnecessary damage has occurred previously and complies with requirements |
|
Completed |
Evidence:
|
Install small ELV WECS
|
|
Workplace risk control measures and procedures are applied Completed |
Evidence:
|
Equipment is transported safely to the site in accordance with workplace procedures |
|
Completed |
Evidence:
|
Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures |
|
Completed |
Evidence:
|
Circuits/machines/plant are isolated in accordance with WHS/OHS requirements and workplace procedures |
|
Completed |
Evidence:
|
System components are installed in compliance with technical industry standards, job specifications and requirements, and with sufficient access to enable terminations, adjustment and maintenance |
|
Completed |
Evidence:
|
Wiring is terminated at components and associated equipment in accordance with manufacturer specifications and functional and regulatory requirements |
|
Completed |
Evidence:
|
Unexpected events are discussed with relevant person/s, dealt with and documented in accordance with workplace procedures |
|
Completed |
Evidence:
|
Unexpected situations are dealt with safely and with the approval of authorised person/s |
|
Completed |
Evidence:
|
Quality checks of installed apparatus are conducted in accordance with workplace procedures |
|
Completed |
Evidence:
|
System installation is completed minimising waste of materials, damage to apparatus, circuits, the surrounding environment and services using sustainable energy principles |
|
Completed |
Evidence:
|
Complete installation and report installation activities
|
|
Workplace risk control measures and procedures are applied Completed |
Evidence:
|
Worksite is cleaned and made safe in accordance with workplace procedures |
|
Completed |
Evidence:
|
Final checks are conducted to confirm installed apparatus conforms to requirements |
|
Completed |
Evidence:
|
System operation is tested and installation verified as compliant with industry standards and work specifications |
|
Completed |
Evidence:
|
‘As-installed’ apparatus and associated equipment are documented and relevant person/s notified in accordance with workplace procedures |
|
Completed |
Evidence:
|
Customer is informed of system operation, routine maintenance and limitations |
|
Completed |
Evidence:
|
Documentation required by industry standards or job specifications is provided to the customer |
|
Completed |
Evidence:
|