KS01-G307B | Transmission pipeline facility and equipment maintenance |
| G 3.3.22 | Plan and prepare for low, medium and secondary pipeline inspection and testing procedures (above 1050kPa) Evidence shall show an understanding of the requirements to plan and prepare for low, medium and secondary pipeline inspections and testing on a Gas Industry pipeline (Transmission), indicated by the following: relevant OHS procedures and environmental requirements in relation to preparing for inspection and testing procedures on low, medium and secondary pipelines, facilities and equipment planning requirements necessary to carry out inspection and testing procedures on low, medium and secondary pipelines, facilities and equipment identification of tools, instruments and equipment required for inspection and testing procedures on low, medium and secondary pipelines, facilities and equipment obtaining and interpreting various workshop manuals, part lists, checklists and specifications as required locate and discuss the use of appropriate emergency equipment. |
| G 3.3.23 | Secure facilities/equipment prior to inspection and testing of low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of the requirements to secure facilities and equipment for inspection and testing of low, medium and secondary pipelines, facilities and equipment on a Gas Industry pipeline (Transmission), indicated by the following: discussion of the requirements for safety plans and non-routine procedures identification of precautions and concerns relevant to the inspection and testing being carried out demonstration of the procedures to safely isolate, depressurise, tag and lockout facilities and equipment adherence to procedures, OHS, legislative and environmental requirements. |
| G 3.3.24 | Inspect and test low, medium and secondary pipelines, facilities and equipment (above 1050kPa) in accordance with procedures, OHS and environmental requirements Evidence shall show an understanding of the requirements to inspect and test low, medium and secondary pipelines, facilities and equipment in accordance with procedures, OHS and environmental requirements, indicated by the following: identification of types of pipeline, facilities and equipment to be inspected and tested types of faults and their characteristics that may be encountered during inspection and testing procedures of pipelines, facilities and equipment characteristics of the operating capabilities and limitations of tools and equipment used to inspect and test pipelines, facilities and equipment carrying out of inspection and testing of pipelines, facilities and equipment in accordance with procedures, OHS and environmental requirements. |
| G 3.3.25 | Correctly diagnose and assess faults of low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of the requirements to correctly diagnose and assess faults of low, medium and secondary pipeline, facilities and equipment, indicated by the following: methods available for fault finding and trouble shooting to determine what maintenance is required. evaluation of the condition of operational systems equipment for safety and serviceability identification of required maintenance communicate and document the required findings/actions using the appropriate reporting and recording systems. |
| G 3.3.26 | Plan and prepare for high pressure pipeline inspection and testing procedures Evidence shall show an understanding of the requirements to plan and prepare for high pressure pipeline inspection and testing procedures for a Gas Industry pipeline (Transmission), indicated by the following: explanation of relevant OHS, procedures and environmental requirements in relation to preparing for inspection and testing procedures for high pressure pipelines, facilities and equipment planning requirements necessary to carry out inspection and testing procedures on high pressure pipelines, facilities and equipment tools, instruments and equipment required for inspection and testing procedures on high pressure pipelines, facilities and equipment workshop manuals, part lists, check lists and specifications required appropriate emergency equipment. |
| G 3.3.27 | Secure facilities/equipment prior to inspection and testing of high pressure pipelines, facilities and equipment Evidence shall show an understanding of the requirements to secure facilities and equipment prior to the inspection and testing of high pressure Gas Industry pipeline (Transmission), facilities and equipment, indicated by the following: requirements for safety plans and non-routine procedures precautions and concerns relevant to the inspection/testing being carried out procedures to safely isolate, depressurise, tag and lockout facilities/equipment procedures, OHS legislative and environmental requirements. |
| G 3.3.28 | Inspect and test high pressure pipelines, facilities and equipment in accordance with procedures, OHS and environmental requirements Evidence shall show an understanding of the requirements to Inspect and test high pressure pipelines, facilities and equipment in accordance with procedures, OHS and environmental requirements, indicated by the following: requirements for safety inspecting and testing high pressure pipelines, facilities and equipment precautions and concerns relevant to the inspection/testing being carried out procedures to safely isolate, and safely inspect and test high pressure pipelines, facilities and equipment OHS legislative and environmental requirements related to inspecting and testing high pressure pipelines, facilities and equipment. |
| G 3.3.29 | Correctly diagnose and assess faults of high pressure pipelines, facilities and equipment Evidence shall show an understanding of how to correctly diagnose and assess faults of high pressure pipelines, facilities and equipment on a Gas Industry pipeline (Transmission), indicated by the following: methods available for fault finding and troubleshooting to determine what maintenance is required condition of operational systems equipment for safety and serviceability identifying the required maintenance communicating and documenting the required findings/actions using the appropriate reporting and recording systems. |
| G 3.3.30 | Plan and prepare for routine maintenance on low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of how to plan and prepare for routine maintenance of low, medium and secondary pipelines, facilities and equipment on a Gas Industry pipeline (Transmission), indicated by the following: maintenance work to be carried out, the required equipment and materials and the relevant manufacturer's specifications and procedures OHS and environmental requirements applicable to the work area relevant plans, drawings and written information required to perform maintenance preparation of equipment including the adjusting and calibration to ensure high performance operation. |
| G 3.3.31 | Secure work area prior to maintenance of low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of the requirements to secure work areas prior to maintenance of low, medium and secondary pipelines, facilities and equipment on a Gas Industry pipeline (Transmission), indicated by the following: identification and obtaining required permits preparation and securing of a work area in accordance with ohs and environmental requirements locating and using appropriate emergency equipment. |
| G 3.3.32 | Perform routine maintenance on low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of the performing routine maintenance on low, medium and secondary pipelines, facilities and equipment for a Gas Industry pipeline (Transmission), indicated by the following: different types of maintenance procedures appropriate for high pressure pipelines, facilities and equipment maintenance procedures relevant to required work tools, instruments and all other equipment safely and effectively during the required maintenance tasks routine maintenance following manufacturer's specifications OHS requirements and procedures in an efficient and effective manner. |
| G 3.3.33 | Notify completion of work on low, medium and secondary pipelines, facilities and equipment (above 1050kPa) Evidence shall show an understanding of the procedures for the notification of the completion of work on low, medium and secondary pipelines, facilities and equipment, indicated by the following: procedures for documenting and recording maintenance results notification of the relevant authorities in relation to completion of work in accordance with procedures completion of maintenance records including parts used, further maintenance requirements and time to next service cancel and sign off relevant work permits on completion of maintenance work clearance of work area of equipment, tools and materials. |
| G 3.3.34 | Plan and prepare for routine maintenance of high pressure pipelines, facilities and equipment Evidence shall show an understanding of the procedures required to plan and prepare for routine maintenance of high pressure pipelines and equipment on a Gas Industry pipeline (Transmission), indicated by the following: identification of the types of problems and faults that may require repair obtain, interpret and use the relevant technical drawings, plans and specifications during the preparation and planning of repair work identify hazards and explain the relevant OHS procedures and environmental requirements that require implementation prior to an during repair work identification of procedures, persons, equipment and processes required for repair work and plan the coordination of these resources obtain the required work permits locate and securing of emergency equipment and ensure all persons are familiar with emergency plans. |
| G 3.3.35 | Secure work area and equipment prior to repair Evidence shall show an understanding of the requirements to secure a work area and equipment prior to repair on a Gas Industry pipeline (Transmission), indicated by the following: requirements for, and use of, work permits, safety plans, non-routine procedures and safety checklists implementation and adherence to procedures, OHS and environmental requirements to ensure a safe worksite is established and maintained preparation of equipment for repair work ensuring it is depressurised, tagged and locked out routine checks and documentation of facilities/equipment and discuss overall repair process verification that facilities and equipment are safe for repair work to commence. |
| G 3.3.36 | Perform routine maintenance on high pressure pipelines, facilities and equipment Evidence shall show an understanding of the requirements to undertake the routine maintenance on high pressure pipeline, facilities and equipment, indicated by the following: different types of maintenance procedures appropriate for high pressure pipelines, facilities and equipment maintenance procedures relevant to the required work tools, instruments and all other equipment that is used safely and effectively during maintenance tasks routine maintenance following manufacturer's specification, OHS requirements and procedures in a efficient manner. |
| G 3.3.37 | Notify completion of work on high pressure pipelines, facilities and equipment Evidence shall show an understanding of the process for completing work on high pressure pipelines, facilities and equipment, indicated by the following: procedures for documenting and recording maintenance results notifying the relevant authorities of completion of work in accordance with procedures maintenance records including parts used, further maintenance requirements and time to next service signing off of relevant work permit procedures cleaning up of work area equipment, tools and materials. |