The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Complete work
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures Completed |
Evidence:
|
Plan and prepare for work
|
|
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work |
|
Completed |
Evidence:
|
Resources are obtained and inspected for compliance with job specification |
|
Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification |
|
Completed |
Evidence:
|
Work is planned sequenced, prioritised, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Remove associated equipment to facilitate maintenance
|
|
Associated equipment isolation and depressurisation is confirmed visually and manually, as required, in accordance with workplace procedures Completed |
Evidence:
|
Pressure vessel is disconnected, in accordance with the workplace procedures |
|
Completed |
Evidence:
|
Pressure vessel's associated equipment is removed, in a manner which will assist in replacement, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Pressure vessel is inspected for abnormalities, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Dismantle and maintain pressure vessel
|
|
Hazardous material is identified and arrangements are made for clearance from pressure vessel and work site, in accordance with workplace procedures and legislative requirements Completed |
Evidence:
|
Internal and external components are systematically dismantled, marked and recorded, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Components are refurbished, catalogued and stored for reassembly, in accordance with workplace procedures and manufacturers' specifications |
|
Completed |
Evidence:
|
Gasket and seal requirements are assessed, manufactured or obtained, in accordance with workplace procedures and manufacturers' specifications |
|
Completed |
Evidence:
|
Vessel mountings are maintained, as required, in accordance with workplace procedures and manufacturers' specifications |
|
Completed |
Evidence:
|
Internal piping or tubing is tested and expanded or replaced, as required, in accordance with workplace procedures and manufacturers' specifications |
|
Completed |
Evidence:
|
Reassemble pressure vessel
|
|
Internal and external components are systematically reassembled, in accordance with workplace procedures and manufacturers' specifications Completed |
Evidence:
|
Associated equipment is aligned and replaced, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Fastenings are torqued, in accordance with manufactures' specification and workplace procedures |
|
Completed |
Evidence:
|
Vessel is pressure tested, monitored and adjusted, if required, in accordance with workplace procedures, and legislative requirements
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures |
|
Completed |
Evidence:
|