The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Complete work
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures Completed |
Evidence:
|
Plan and prepare for work
|
|
Requirements including scope of work and assigned tasks are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work |
|
Completed |
Evidence:
|
Resources are obtained and inspected for compliance with job specification |
|
Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification |
|
Completed |
Evidence:
|
Work is planned, sequenced and prioritised, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Assess engine condition
|
|
Internal combustion engine is run and components are assessed visually or aurally to determine condition of engine under load, in accordance with workplace procedures Completed |
Evidence:
|
Internal combustion engine condition is tested whilst under load, using appropriate test equipment, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Remove auxiliary systems
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Auxiliary systems are removed, marked and labelled, to facilitate replacement, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Load device is uncoupled and removed, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Overhauland maintain engine
|
|
Internal combustion engine is systematically dismantled, and component parts are clearly marked for identification, in accordance with workplace procedures Completed |
Evidence:
|
Internal combustion engine components are examined, and dimensional inspection is performed, in accordance with workplace procedures, to determine conformance to manufacturers' specification |
|
Completed |
Evidence:
|
Faulty components are replaced, in accordance with manufacturers' specification |
|
Completed |
Evidence:
|
Internal combustion engine components are reassembled, and necessary adjustments are made, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Replace auxiliary systems
|
|
Load device is coupled, in accordance with workplace procedures and manufacturers' specification Completed |
Evidence:
|
Auxiliary equipment is maintained, as required, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Auxiliary equipment is aligned and installed, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Internal combustion engine is started and function tested, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Internal combustion engine operating characteristics are monitored, recorded and adjustments are made to obtain optimum performance, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Auxiliary equipment and/or components are overhauled, as required, in accordance with workplace procedures and manufacturers' specification
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures |
|
Completed |
Evidence:
|