The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Verify fault
|
|
Normal performance and function of mechanical equipment is ascertained by consulting manufacturers' specifications and manuals, in accordance with workplace procedures Completed |
Evidence:
|
Fault indicators, technical information and diagnostic techniques are used to verify reported faults in accordance with workplace procedures Completed |
Evidence:
|
Faults are reproduced and monitored, if possible, in accordance with workplace procedures Completed |
Evidence:
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Fault finding is carried out with others, in accordance with workplace procedures Completed |
Evidence:
|
Mechanical equipment components, pipe work, fittings and support fixings are inspected for obvious faults, in accordance with workplace procedures Completed |
Evidence:
|
Test and measurement instruments are used, in accordance with workplace procedures and manufacturers' specification Completed |
Evidence:
|
Repair fault
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures site requirements Completed |
Evidence:
|
Faulty, worn, damaged or unsecured components are replaced or repaired, in accordance with workplace procedures Completed |
Evidence:
|
Parts and components are selected and replaced, as required, in accordance with workplace procedures and manufacturers' specification Completed |
Evidence:
|
All faults are repaired or rectified, in accordance with the work plan Completed |
Evidence:
|
Final inspection is performed, in accordance with workplace procedures Completed |
Evidence:
|
Complete work
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored in accordance with workplace procedures Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures Completed |
Evidence:
|
Plan and prepare for work
|
|
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work |
|
Completed |
Evidence:
|
Resources are obtained and inspected for compliance with workplace procedures |
|
Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specifications |
|
Completed |
Evidence:
|
Work is planned, sequenced and prioritised, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Potential hazards are identified and risk control measures are selected, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures
|
|
Normal performance and function of mechanical equipment is ascertained by consulting manufacturers' specifications and manuals, in accordance with workplace procedures Completed |
Evidence:
|
Fault indicators, technical information and diagnostic techniques are used to verify reported faults in accordance with workplace procedures |
|
Completed |
Evidence:
|
Faults are reproduced and monitored, if possible, in accordance with workplace procedures
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Fault finding is carried out with others, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Mechanical equipment components, pipe work, fittings and support fixings are inspected for obvious faults, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Test and measurement instruments are used, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
Determine cause of fault
|
|
Appropriate personnel are consulted, if required, about faulty mechanical equipment, in accordance with workplace procedures Completed |
Evidence:
|
Maintenance records on mechanical equipment are consulted, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Conclusions about the nature and cause of the fault, based on analysis of evidence, are used, in accordance with workplace procedures
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures site requirements Completed |
Evidence:
|
Faulty, worn, damaged or unsecured components are replaced or repaired, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Parts and components are selected and replaced, as required, in accordance with workplace procedures and manufacturers' specification |
|
Completed |
Evidence:
|
All faults are repaired or rectified, in accordance with the work plan |
|
Completed |
Evidence:
|
Final inspection is performed, in accordance with workplace procedures
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures |
|
Completed |
Evidence:
|