NTISthis.com

Evidence Guide: UEPMNT411 - Diagnose and repair faults in complex electrical equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

UEPMNT411 - Diagnose and repair faults in complex electrical equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Complete work

  1. Work is completed and appropriate personnel are notified, in accordance with workplace procedures
  2. Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  3. Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  4. Work completion details are finalised, in accordance with workplace procedures
Work is completed and appropriate personnel are notified, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work completion details are finalised, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan and prepare forwork

  1. Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Resources are obtained and inspected for compliance with job specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work is planned, sequenced and prioritised, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential hazards are identified and risk control measures are selected and implemented, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is prepared, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnose complex electricalfault

  1. Normal performance and function of complex and High Voltage electrical equipment is reviewed, in accordance with workplace procedures
Normal performance and function of complex and High Voltage electrical equipment is reviewed, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complex and High Voltage electrical equipment fault indicators and technical information are used, in accordance with workplace procedures, to diagnose and verify reported faults

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complex and High Voltage electrical equipment symptoms are reproduced and monitored, if possible, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Find complex electrical equipmentfault

  1. Isolations for work are confirmed, where appropriate, in accordance with workplace procedures
Isolations for work are confirmed, where appropriate, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complex electrical equipment components, wires, cables, terminations and support fixings are inspected, in accordance with workplace procedures, for faults

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Diagnostic techniques are selected and used to determine complex electrical equipment faults, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are disconnected, in accordance with workplace procedures, to enable test measurements of suspected faulty components whilst ensuring no back feed readings occur

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test and measurement instruments are used, in accordance with workplace procedures and manufacturers' specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Determine cause of complex electrical equipmentfault

  1. Appropriate personnel are consulted, if required, in accordance with workplace procedures
Appropriate personnel are consulted, if required, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information from fault indicators and maintenance records are used, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conclusions about the nature and cause of the fault from analysis of evidence is undertaken, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair complex electrical equipment fault

  1. Faulty, worn or damaged complex electrical equipment components are repaired, in accordance with workplace procedures
Faulty, worn or damaged complex electrical equipment components are repaired, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complex electrical equipment components disconnected for testing are reconnected, in accordance with workplace procedures, with terminations checked to ensure they are electrically and mechanically sound

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

All faults are repaired, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Final inspection of complex electrical equipment is performed, in accordance with workplace procedures

  1. Work is completed and appropriate personnel are notified, in accordance with workplace procedures
Work is completed and appropriate personnel are notified, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work completion details are finalised, in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge
Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.