The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare the work
|
|
Work requirements are identified from work orders or equivalent and confirmed with appropriate parties or by site inspection. Completed |
Evidence:
|
Occupational Health and Safety standards, statutory requirements, relevant Australian standards, codes of practice, manufacturers’ specifications, environmental requirements and enterprise procedures are identified, applied and monitored throughout the work procedures. Completed |
Evidence:
|
Resources required to satisfy the work plan are identified, obtained and inspected for compliance with the job specifications. Completed |
Evidence:
|
Relevant plans, drawings and texts are selected and interpreted in accordance with the work plan. Completed |
Evidence:
|
Correct size, type and quantity of materials and components are determined, obtained and inspected for compliance with the job specifications. Completed |
Evidence:
|
Work is planned in detail including sequencing and prioritising and considerations made, where appropriate, for the maintenance of plant security and capacity in accordance with system/site requirements. Completed |
Evidence:
|
Co-ordination requirements, including requests for isolations where appropriate, are resolved with others involved, affected or required by the work. Completed |
Evidence:
|
Potential hazards are identified and control measures are implemented. Completed |
Evidence:
|
Work area is prepared in accordance with work requirements and site procedures. Completed |
Evidence:
|
Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of on-the-job training. Completed |
Evidence:
|
Verify the fault
|
|
System function and principles are determined and understood by referring to drawings, circuit diagrams, flow charts, equipment manuals and expert personnel. Completed |
Evidence:
|
Fault indicators, appropriate technical information, diagnostic techniques are used to verify reported symptoms or faults in accordance with the work plan. Completed |
Evidence:
|
Symptoms are reproduced and monitored if practical, whilst due regard for personnel safety and plant security is observed in accordance with the work plan. Completed |
Evidence:
|
Find the fault
|
|
Required isolations are confirmed where appropriate in accordance with site requirements. Completed |
Evidence:
|
Fault finding is carried out in conjunction with others involved in, or affected by, the work in accordance with enterprise/job requirements. Completed |
Evidence:
|
Equipment components, wires, cables, terminations and support fixings are inspected for obvious faults in accordance with the work plan. Completed |
Evidence:
|
All appropriate fault finding/diagnostic techniques are identified, selected and used to determine the fault in accordance with the work plan. Completed |
Evidence:
|
Faulty system equipment/components are localised/isolated and the malfunction is confirmed by inspection and testing in accordance with site requirements and work plan. Completed |
Evidence:
|
Test and measurement instruments are used in accordance with manufacturers’ instructions. Completed |
Evidence:
|
Determine cause of fault
|
|
All appropriate personnel are consulted in order to obtain as many details relating to the faulty equipment as possible. Completed |
Evidence:
|
System monitoring equipment, fault indicators and maintenance records reviewed in order to obtain as many details relating to the faulty equipment as possible. Completed |
Evidence:
|
Valid conclusions about the nature and cause of the fault are reached from analysis of available evidence in accordance with the work plan. Completed |
Evidence:
|
Repair or rectify the fault
|
|
Required isolations are confirmed where appropriate in accordance with site requirements. Completed |
Evidence:
|
Appropriate repair procedures are undertaken in conjunction with others involved in, or affected by, the work in accordance with the work plan. Completed |
Evidence:
|
Faulty, worn, damaged or unsecured equipment/components are replaced, repaired or secured in accordance with the work plan. Completed |
Evidence:
|
Equipment/components are selected and replaced as required in accordance with appropriate specifications and the work plan. Completed |
Evidence:
|
Components disconnected for testing are reconnected having been proven free of faults and all terminations are then checked to ensure they are electrically and mechanically sound in accordance with the work plan. Completed |
Evidence:
|
All faults are repaired or rectified in accordance with the work plan. Completed |
Evidence:
|
Correct operation of the system is confirmed in accordance with site requirements and work plan. Completed |
Evidence:
|
Final job inspection is performed and permits are relinquished as required in accordance with the work plan. Completed |
Evidence:
|
Complete the work
|
|
Work is completed and appropriate personnel notified in accordance with site/enterprise requirements. Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with site/enterprise procedures. Completed |
Evidence:
|
Plant, tools and equipment are maintained and stored in accordance with site/enterprise procedures. Completed |
Evidence:
|
Work completion details are finalised in accordance with site/enterprise procedures. Completed |
Evidence:
|