The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Complete work
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures Completed |
Evidence:
|
Plan and prepare for work
|
|
Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures Completed |
Evidence:
|
Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work |
|
Completed |
Evidence:
|
Resources are obtained and inspected for compliance with job specification |
|
Completed |
Evidence:
|
Relevant plans, drawings and manuals are selected and used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specification |
|
Completed |
Evidence:
|
Work is planned, sequenced and prioritised, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work area is prepared, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Diagnose instrumentation systemfault
|
|
Normal performance and function of instrumentation system is ascertained, in accordance with workplace procedures Completed |
Evidence:
|
Fault indicators, appropriate technical information and diagnostic techniques are identified and used, in accordance with workplace procedures, to diagnose faults |
|
Completed |
Evidence:
|
Faults are reproduced and monitored, if possible, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Find instrumentation system fault
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Instrumentation system equipment, components, wires, cables, terminations and support fixings are inspected, in accordance with workplace procedures, for faults |
|
Completed |
Evidence:
|
Diagnostic techniques are used, in accordance with workplace procedures, to determine the fault |
|
Completed |
Evidence:
|
Components are disconnected, in accordance with workplace procedures, to enable test measurements of suspected faulty components without back feed readings occurring |
|
Completed |
Evidence:
|
Test and measurement instruments are used, in accordance with workplace procedures, manufacturers' specifications and job requirements |
|
Completed |
Evidence:
|
Determine cause of instrumentation systemfault
|
|
Appropriate personnel are consulted about faults, if required, in accordance with workplace procedures Completed |
Evidence:
|
Use is made of information from fault indicators and maintenance records, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Conclusions about the nature and cause of the fault from analysis of available evidence is used, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Repair instrumentation system fault
|
|
Isolations are confirmed, where appropriate, in accordance with workplace procedures Completed |
Evidence:
|
Faulty, worn or damaged equipment and components are repaired, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Parts and components are replaced, as required, in accordance with workplace procedures and manufacturers' specifications |
|
Completed |
Evidence:
|
Instrumentation system equipment and components are disconnected for testing and are reconnected, in accordance with workplace procedures, and terminations are then checked to ensure they are electrically and mechanically sound |
|
Completed |
Evidence:
|
Faults are repaired, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Final inspection is performed, in accordance with workplace procedures
|
|
Work is completed and appropriate personnel are notified, in accordance with workplace procedures Completed |
Evidence:
|
Work area is cleared of waste, cleaned, restored and secured in accordance with workplace procedures |
|
Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures |
|
Completed |
Evidence:
|
Work completion details are finalised, in accordance with workplace procedures |
|
Completed |
Evidence:
|