Prepare to inspect, test and verify overhead distribution installation

1. Works schedules, construction plans, drawings, workplace procedures and material lists are received and confirmed

Completed
Date:

Job requirements and workplace procedures are identified and communicated with relevant personnel

Completed
Date:

Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for accessing, testing and verifying overhead distribution installations are obtained and confirmed for the purposes of the work to be performed

Completed
Date:

Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures

Completed
Date:

Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures

Completed
Date:

Relevant work permits are obtained, understood and signed in accordance with workplace procedures

Completed
Date:

Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order

Completed
Date:

Specialist test and measurement equipment for testing and verification of overhead distribution installations are obtained, inspected and confirmed in working order and calibrated in accordance with requirements and workplace procedures

Completed
Date:

Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures

Completed
Date:

Personnel participating in work are fully briefed and responsibilities confirmed in accordance with workplace procedures

Completed
Date:

Traffic management plan is confirmed as being applied in accordance with workplace procedures

Completed
Date:

Carry out inspection, testing and verification of overhead distribution installation

1. WHS/OHS, sustainable energy and environmental principles and practices are monitored and followed to reduce incidents in accordance with workplace procedures

Completed
Date:

Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures

Completed
Date:

Inspection, safe access, testing and verification of overhead distribution installations are completed in agreed timeframes, to quality standards and with a minimum of waste in accordance with workplace procedures

Completed
Date:

Overhead distribution installations and associated hardware are visually inspected, positioned, secured and terminated/connected in accordance with workplace procedures

Completed
Date:

Energised tests and/or measurements to verify overhead distribution installations are determined in accordance with workplace safety procedures and relevant industry standards, as required

Completed
Date:

Overhead distribution installations are checked for suitability and conformance with workplace procedures and relevant electrical network supply industry standards

Completed
Date:

Overhead distribution installation protection methods and devices are validated in accordance with workplace procedures and relevant distribution network protection industry standards

Completed
Date:

Overhead distribution installation switchgear is validated in accordance with workplace procedures and relevant distribution network protection industry standards

Completed
Date:

Overhead distribution installations earthing systems and multiple earth neutral (MEN) system components are verified as correctly installed and conforming to workplace procedures and relevant distribution network industry standards

Completed
Date:

Mandatory tests are conducted to verify overhead distribution installation system voltage,phasing, phase rotation, polarity and neutral potentialcomply with relevant industry standards

Completed
Date:

Solutions used to solve overhead distribution installation problems are applied in accordance with workplace procedures

Completed
Date:

Quality checks of work are undertaken in accordance with workplace procedures

Completed
Date:

Report inspection and test findings

1. Hazards are identified, risks assessed and control measures implemented

Completed
Date:

Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures

Completed
Date:

WHS/OHS and environmental incidents are reported in accordance with workplace procedures, as required

Completed
Date:

Worksite is rehabilitated, cleaned up and made safe and in accordance with workplace procedures

Completed
Date:

Non-compliance defects are identified, corrected and/or reported in accordance with workplace procedures

Completed
Date:

Recommendations for rectifying defects are made in accordance with workplace procedures

Completed
Date:

Mandatory documentation is completed in accordance with workplace procedures and relevant industry standards

Completed
Date:

Tools, equipment and surplus resources are, where appropriate, cleaned, checked and returned in accordance with workplace procedures

Completed
Date:

Relevant work permits are signed off and electrical equipment (network infrastructure) are returned to service in accordance with workplace procedures

Completed
Date:

Work records, reports and/or documentation are completed in accordance with workplace procedures

Completed
Date: