- MEM04016C - Develop and manufacture precision models
Assessor Resource
MEM04016C
Develop and manufacture precision models
Assessment tool
Version 1.0
Issue Date: June 2024
This unit applies where accurate and complicated models are required to assist in the development and manufacture of production of tooling for a wide variety of processes, such as blow moulding, metal forming, vacuum forming, rotational moulding, gravity die casting, pressure die casting, low pressure die casting, complex ferrous and non-ferrous castings, plastic injection moulding, etc.
Models may include flow models, viewing models, prototype and development models using a wide range of materials e.g. timber, metal plastic, fibreglass composites and processes. It may include the inspection/completion of items made in the stereo lithography process etc.
Work is undertaken autonomously or in a team environment using predetermined standards of quality, safety and workshop procedures. All specifications are interpreted from complex drawings and Mylar drawings, technical sketches and/or customer requirements.
When the programming of coordinate measurement machines and/or NC/CNC machines is required see appropriate machine programming units.
Band: A
Unit Weight: 6
This unit covers laying out, manufacturing and finishing precision models.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Path 1
MEM04010B
Develop and manufacture wood patterns
MEM04011B
Produce polymer patterns
MEM04012B
Assemble plated patterns
MEM04013B
Develop and manufacture polystyrene patterns
MEM04014B
Develop and manufacture production patterns
MEM04015B
Develop and manufacture vacuum forming moulds and associated equipment
MEM04018B
Perform general woodworking machine operations
MEM07005C
Perform general machining
MEM09002B
Interpret technical drawing
MEM12003B
Perform precision mechanical measurement
MEM12006C
Mark off/out (general engineering)
MEM12023A
Perform engineering measurements
MEM12024A
Perform computations
MEM13003B
Work safely with industrial chemicals and materials
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
MEM30012A
Apply mathematical techniques in a manufacturing engineering or related environment
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to develop and manufacture precision models. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment | This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with developing and manufacturing precision models or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment | Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Look for evidence that confirms skills in: reading, interpreting and following information on written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents selecting appropriate materials conceptualising and determining type of model required to meet specifications performing calculations necessary for manufacture developing and manufacturing datum boards, datum holes or datum faces, jigs and fixtures etc. required for accurate manufacture developing a planned sequence of manufacture identifying areas required to be accurately manufactured by NC/CNC selecting and operating the appropriate range of machines and machining processes for manufacturing the model accurately to size, tolerance and specifications using required hand and hand held power tools measuring components to specified tolerances carrying out checking procedures for checking to the predetermined accuracy and fine tolerances orally reporting routine information recording |
Required knowledge |
Look for evidence that confirms knowledge of: consequences of selecting inappropriate materials various processes requiring models calculus, engineering calculations and formulae relating to developing and manufacturing precision models properties and uses of datum boards, datum holes or datum faces reasons for developing the sequence of manufacture the range of machines and machining processes and their operations the various checking procedures and devices including coordinate measuring and machine checking procedures for recording deviation or modification to original drawings or specifications hazards and control measures associated with developing and manufacturing precision models safe work practices and procedures |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Material | Timber, metal, plastic, fibreglass, composites etc. |
Processes | High volume foundry tooling, injection moulding, pressure die casting etc. |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Drawings, instructions and specifications are interpreted and understood. | |||
Appropriate material is selected to meet specifications. | |||
Finished model design is conceptualised and planned with reference to customer's specifications (written or verbal) for finish, quality and form, using applicable processes. | |||
Contractions allowances, clearances, tapers etc. are calculated to establish model parameters. | |||
Datum boards, jigs and fixtures are designed and manufactured as required. | |||
Sequence of manufacture, including build-up on datum board, establishing datum's mark out of model and areas to be NC/CNC machined, are determined. | |||
Appropriate machines and machining processes are selected to shape/produce model to specifications. | |||
A range of hand and hand held power tools is selected and used utilising acceptable techniques and procedures to fashion/manufacture model to fine tolerances according to specifications, ensuring that surface finish is appropriate to the type of model. | |||
Appropriate measurement/calculations are undertaken to check specifications, including coordinate measuring and machine checking as required. | |||
Where necessary, all deviations or modifications to original tooling design, prints or plans, are recorded and reported consistent with standard operating procedures. |
Forms
Assessment Cover Sheet
MEM04016C - Develop and manufacture precision models
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEM04016C - Develop and manufacture precision models
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: