- MEM05018C - Perform advanced welding using gas metal arc welding process
Assessor Resource
MEM05018C
Perform advanced welding using gas metal arc welding process
Assessment tool
Version 1.0
Issue Date: June 2024
This unit applies to welds associated with a range of structural sections and/or plate and/or pipe for general fabrication using ferrous and non-ferrous materials.
Weld quality would typically conform to Australian Standard 1554 Structural Purpose, Bureau Det Norse Verticas or equivalent.
Where advanced manual thermal cutting, gouging and shaping is carried out, Unit MEM05008C (Perform advanced manual thermal cutting, gouging and shaping) should also be selected.
Band: A
Unit Weight: 4
This unit covers preparing materials, selecting and setting up the welding equipment, carrying out advanced gas metal arc welding (GMAW), inspecting for and correcting defects, and maintaining the weld records.
You may want to include more information here about the target group and the purpose of the assessments (eg formative, summative, recognition)
Prerequisites
Path 1
MEM05007C
Perform manual heating and thermal cutting
MEM05017D
Weld using gas metal arc welding process
MEM05050B
Perform routine gas metal arc welding
MEM05051A
Select welding processes
MEM05052A
Apply safe welding practices
MEM09002B
Interpret technical drawing
MEM12023A
Perform engineering measurements
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
Employability Skills
This unit contains employability skills.
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to prepare materials, select and set up the welding equipment, carry out advanced GMAW, inspect for and correct defects, and maintain the weld records. Competency in this unit cannot be claimed until all prerequisites have been satisfied. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment | This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing advanced welding using gas metal arc welding process or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment | Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assingnment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Required skills |
Look for evidence that confirms skills in: welding to conform to Australian Standard 1554 Structural Purpose, Bureau Det Norse Verticas or equivalent performing safe welding practices using and applying personal protective equipment for GMAW interpreting weld requirements and specifications entering information onto proformas and standard workplace forms interpreting technical drawings and weld specifications relating to advanced GMAW using hand and power tools to prepare and weld material using GMAW using measurement and numeracy skills relating to advanced GMAW and preparation selecting equipment and consumables appropriate to the task using visual identification of faults/defects |
Required knowledge |
Look for evidence that confirms knowledge of: in-depth knowledge of the properties and characteristics of a wide range of materials requirements to conform to Australian Standard 1554 Structural Purpose, Bureau Det Norse Verticas or equivalent weld procedures and requirements different welder identification systems such as numbering, bar coding, paint coding, letter stamps safe welding practices use and application of personal protective equipment for GMAW |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Welding equipment | AC or DC welding machines, settings, electrodes and related equipment |
Preparing materials | Preheating, setting up of jigs, fixtures, clamps, etc., joint preparation e.g. bevelling |
Materials | Low carbon, cast iron, stainless and low alloy steel, aluminium and aluminium alloys |
Welds | Fillet and butt in all positions |
Distortion prevention measures | Preheating, setting up of jigs, fixtures, clamps, etc. |
Defects | Porosity, slag inclusions, discontinuities, lack of penetration, undercut |
Appropriate methods | Oxy acetylene arc equipment, grinding devices |
Weld records | Proformas and other standard workplace forms |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
Welding equipment is prepared. | |||
Welding equipment is assembled and adjusted correctly and safely. | |||
Materials are prepared to achieve required weld specification. | |||
Weld requirements are interpreted correctly. | |||
Welds are deposited correctly to specifications. | |||
Appropriate distortion prevention measures are selected and distortions are rectified as required. | |||
Weld joints are visually inspected against specifications. | |||
Defects are removed using appropriate methods for the given task.. | |||
Weld records are correctly completed and maintained. |
Forms
Assessment Cover Sheet
MEM05018C - Perform advanced welding using gas metal arc welding process
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
MEM05018C - Perform advanced welding using gas metal arc welding process
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: