Application
Not Applicable
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||
1 Assess suitability of industrial machinery for cleaning | 1.1 Assess the industrial machinery to be cleaned and review work order in accordance with company requirements and clarify any issues with appropriate person(s) 1.2 Identify hazards and control risks in the work site in accordance with legislative, occupational health and safety (OHS) and companyrequirements 1.3 Identify machinery surfaces and soil type(s) through observation in accordance with work order and company requirements 1.4 Assess machinery cleaninghazards in accordance with work order and legislation, OHS and company requirements 1.5 Select cleaning technique(s) in accordance with work order, manufacturers' specifications and environmental, legislative, OHS and company requirements 1.6 Identify and report any pre-existing damage at the work site to the appropriate person(s) in accordance with company requirements | ||
2 Select equipment and chemicals | 2.1 Select and use suitable personal protective equipment (PPE) in accordance with manufacturers' specifications, OHS and company requirements | ||
2.2 Select equipment and chemicals appropriate for the work order in accordance with OHS and company requirements 2.3 Check operational effectiveness of equipment in accordance with manufacturers' specifications and company requirements 2.4 Adjust mechanical equipment to suit operator's requirements in accordance with manufacturers' specifications and OHS requirements 2.5 Prepare chemicals in accordance with manufacturers' specifications, OHS and company requirements | |||
3 Prepare machinery and site | 3.1 Confirm and reassess hazards and control risks in the work site in accordance with legislative, OHS and companyrequirements 3.2 Install appropriate signage and barriers to maximise public safety during the cleaning operation in accordance with OHS and company requirements 3.3 Utilise existing access platforms in accordance with manufacturers' specifications and OHS and company requirements 3.4 Cover and secure items or areas requiring protection from damage in accordance with work order, manufacturers' specifications and company requirements 3.5 Identify any work restrictions affecting the completion of the work order instructions and advise promptly the appropriate person(s) | ||
4 Clean machinery | 4.1 Prepare heavily soiled areas in accordance with manufacturers' specifications and company requirements 4.2 Clean machinery using appropriate equipment, PPE, chemicals and cleaning technique(s) in accordance with client requirements, work order, manufacturers' specifications and company requirements | ||
4.3 Inspect machinery for residual spots, marks and soil and spot clean as required in accordance with work order and company requirements 4.4 Conduct all work in accordance with manufacturers' specifications and legislative, OHS and company requirements | |||
5 Tidy work site | 5.1 Dispose of all collected soil and waste in accordance with client specifications, work order, manufacturers' specifications and environmental, legislative, OHS and company requirements 5.2 Remove signage and barriers in accordance with work order and OHS and company requirements | ||
6 Clean, safety-check and store equipment and chemicals | 6.1 Clean equipment and PPE in accordance with manufacturers' specifications and environmental, OHS and company requirements 6.2 Safety-check equipment and PPE in accordance with manufacturers' specifications and OHS requirements and record any required maintenance in accordance with company requirements 6.3 Store and maintain equipment and PPE to allow ready access in accordance with manufacturers' specifications and OHS and company requirements 6.4 Store chemicals in accordance with manufacturers' specifications and OHS and company requirements |
Required Skills
Refer to Evidence Guide
Evidence Required
The evidence guide identifies the requirements to be demonstrated to confirm competence for this unit. Assessment must confirm sufficient ability to use appropriate skills and knowledge to clean industrial machinery. Assessment of performance should be over a period of time covering all categories within the range statement that are applicable in the working environment.
Critical aspects of competency
Accurate identification of the surface and soil types.
Awareness of hazards.
Compliance with company and legislative requirements.
Outcomes achieved in relation to customer work order and company requirements.
Safe and efficient cleaning methods.
Selection of appropriate cleaning equipment and chemicals.
Knowledge needed to achieve the performance criteria
Knowledge and understanding are essential to apply this unit in the workplace, to transfer the skills to other contexts and to deal with unplanned events. The knowledge requirements for this unit are listed below.
Knowledge of the range of cleaning equipment and chemicals.
Restrictions or limitations on surfaces that can be pressure washed.
Knowledge of cleaning methods for electrical equipment.
Pressure-washing equipment and functions of the various lances.
Machinery manufacturers' cleaning specifications.
Enterprise maintenance and servicing procedures.
Awareness of applicable legislation, regulations, codes of practice and industry advisory standards.
Communication and negotiation techniques.
Company management structure and reporting procedures.
Company procedures and practices.
Company structure and reporting channels.
Emergency response and evacuation procedures.
Injury, dangerous occurrence and incident reporting.
Knowledge of biological and viral control procedures.
OHS legislation and procedures.
Routes of entry and potential symptoms of exposure from chemicals.
Specific skills needed to achieve the performance criteria
To achieve the performance criteria, some complementary skills are required. These are:
accurate identification of soil types and surface types
selection of appropriate equipment and chemicals
electrical isolation and use of machinery safety 'lock-out systems'
applying correct manual handling techniques
communicating clearly and concisely using written and verbal modes
customer service
handling and disposal of chemicals safely
handling and disposal of contaminated and toxic waste
performing the mathematical calculations required for the dilution and mixing of chemicals as specified on MSDS
planning and organising work
problem solving and critical analysis
reading, interpreting and responding appropriately to directions and safety instructions in equipment manuals and MSDS and on chemical labels
requesting advice or further information
scheduling and rostering
seeking and receiving feedback
sourcing, organising and recording information
working on an individual basis or as part of a team.
Other units of competency that could be assessed with this unit
Competence in this unit may be assessed in conjunction with:
PRMCL20B Clean using pressure washing
PRMCL36B Clean at high levels.
Resources required to assess this unit
The following resources should be available:
access to suitable machinery with a variety of surface types and soil types
access to suitable equipment and chemicals
access to personal protective equipment
access to equipment operating manuals and MSDS
work order instructions, work plans and schedules and policy documents
assessment instruments, including personal planner and assessment record book.
Gaining evidence to assess this unit
For valid and reliable assessment of this unit, the competency should be demonstrated over a period of time and be observed by the assessor.
The competency is to be demonstrated in a range of situations that may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace.
Assessment of competency may be made through practical demonstration in the work environment or in a simulated work environment.
Key competency levels
There are a number of processes that are learnt throughout work and life that are required in all jobs. They are fundamental processes and generally transferable to other work functions. Some of these are covered by the key competencies, although others may be added.
Information below highlights how these processes are applied in this unit of competency.
1 | Perform the process | 2 | Perform and administer the process | 3 | Perform, administer and design the process | |||
How can communication of ideas and information be applied? | 1 | Confirm own role and responsibilities with colleagues and supervisors to ensure compliance with work order and company requirements such as OHS. | ||||||
How can information be collected, analysed and organised? | 1 | Collect and analyse information regarding work site in line with company procedures. | ||||||
How are activities planned and organised? | 1 | Organise and prioritise work tasks to meet work order and company requirements. | ||||||
How can teamwork be applied? | 1 | Provide support and assistance to team members to complete work tasks within designated timelines and to meet company requirements. | ||||||
How can the use of mathematical ideas and techniques be applied? | 1 | Calculate volume of waste to be cleared and measure and carry out chemical applications. | ||||||
How can problem-solving skills be applied? | 1 | Discuss with management/clients/site managers, supervisors and team members how to help solve problems that may arise. | ||||||
How can the use of technology be applied? | 1 | Record data for future use such as stock control. |
Range Statement
The range statement links the required knowledge and organisational and technical requirements to the workplace context. It describes any contextual variables that will be used or encountered when applying the competency in work situations. It allows for different work practices and work and knowledge requirements as well as for differences between organisations and workplaces. The following variables are listed in alphabetical order and may be present for this particular unit.
Appropriate person(s) may include:
clients
colleagues
managers
person(s) in control of work site(s)
supervisors.
Chemicals may include:
acid cleaners
alkaline cleaners
neutral cleaners
solvent cleaners.
Cleaning technique(s) may include:
air blowing
dry wiping
hosing down
pre-spraying
pressure washing
rinsing
scrub and wipe
spot cleaning
wash and wipe
wet wiping.
Company requirements may include:
access and equity policy, principles and practice
business and performance plans
client communication procedures
client confidentiality procedures
client service standards
communication channels and reporting procedures
company goals, objectives, plans, systems and processes
company issued identification badge/card/pass
company policy and procedures
company service standards
defined resource parameters
dress and presentation requirements
duty of care, code of conduct, code of ethics
emergency response and evacuation procedures
maintenance procedures for equipment and PPE
OHS control procedures (e.g. health and safety plans, job plans, job safety analysis, risk assessments, safe operating practices/procedures, safe work instructions, work method statements, safe system of work statements)
OHS policies and procedures
personnel practices and guidelines
policies and procedures relating to own role, responsibility and delegation
quality and continuous improvement processes and standards
records and information systems and processes
rights and responsibilities of employees and employers
training (induction, refresher and new skills) materials
use of contractors
work site access security clearance procedures.
Damage may be caused by:
discolouration
electrical dampness
filter damage
instigation of rust
paint removal.
Environmental requirements may include:
clean-up, containment and/or isolation
company policies and guidelines
environmental protection agency and government department regulations and guidelines
hazardous materials handling
local government regulations/bylaws.
Equipment may include:
air blower
broom
cloths
high-pressure water cleaning unit
hoses
squeegee.
Hazards may include:
allergic reactions to chemicals and/or equipment, including latex allergies
biological waste
bites and stings
blood and blood-stained products
broken glass and other sharp surfaces
chemical containers and/or decanted chemical storage containers labelled incorrectly
confined/restricted spaces
contaminated clothing, chemicals and/or equipment
damaged or inappropriate equipment
dust and fibres
electrical hazards arising from cables, electrical fittings (switches and lights) and untested electrical equipment
environmental impact
extremes of heat and temperature
fatigue
fire
gas
heights
human waste (faeces, urine, vomit)
inadequate lighting and ventilation
infectious and zoonotic diseases e.g. scabies/Q fever
inhaling chemical fumes
leaks, spill, splash and spray
manual handling techniques including awkward and repetitive postures
mobile/vehicle hazards around plant and vehicles
moving and/or unguarded machinery and equipment
noise
occupational violence and bullying
poor manual handling techniques
poor personal hygiene practices
repetitive motion, force and vibration
synergistic chemical reactions (hazardous incompatibility or reactivity)
syringes or other sharps
ultraviolet light
underfoot conditions e.g. slippery, uneven and rough surfaces
unrestricted people access
waste and waste disposal
work in isolated/remote environments.
Legislative requirements may include:
Australian Standards, quality assurance and certification requirements
award and enterprise agreements
codes of practice
national industry standards
relevant Commonwealth/state/territory legislation and local government regulations that affect company operation:
anti-discrimination and diversity
availability of chemical registers/manifests
chemical controls
consumer protection
environmental protection issues
equal employment opportunity
freedom of information
industrial equipment certificates of competency or licences
industrial relations
OHS Acts and regulations
privacy
trade practices
workplace consultative arrangements.
Machinery may include:
bottle making machines
concrete making machines
earth moving equipment
food processing machines and equipment
mining industry equipment
trucks
welders.
Machinery cleaning hazards may include:
exposed and/or damaged electrical components and/or wiring and cabling
faulty pressure hoses or pressure relieve valves
overriding, removal and/or interference with machinery safety devices
over-spraying and/or exposure to machinery electrical components from conductive and/or flammable substances.
Manufacturers' specifications may include:
equipment operational manuals
instructional guides
material safety data sheets
other resources supplied by the manufacturer (such as laminated cards notices, wall posters)
product labels
safety instructions pre-printed on equipment.
Occupational health and safety* (OHS) requirements may relate to:
allergic reactions (contact dermatitis, etc)
communication devices for remote and isolated locations e.g. mobile phone, two-way radio, etc
dermatoxicological control and prevention measures
emergency procedures for eye and skin contact, inhalation and ingestion of toxic substances
hazard identification and risk assessment mechanisms
hazard reporting
health surveillance and monitoring (including blood testing)
hierarchy of hazard control procedures
injury, dangerous occurrence and incident reporting requirements
keeping access ways clear from obstruction
maintaining clear access ways
maintenance procedures for equipment and PPE
national industry standards/codes of practice
OHS control procedures (e.g. health and safety plans, job plans, job safety analysis, risk assessments, safe operating practices/procedures, safe work instructions, work method statements, safe system of work statements)
protection from hazardous substances, noise and dust
protection of people in the workplace
routes of entry and potential symptoms of exposure from chemicals
safety training (induction and refresher)
ultraviolet light
up-to-date electrical test and tag compliance
use of chemicals in accordance with labels
use, storage and maintenance of equipment in accordance with manufacturers' specifications and equipment operating manuals
use, storage and maintenance of personal protective equipment and clothing.
* Also known as occupational safety and health or workplace health and safety
Personal protective equipment (PPE) may include:
ear muffs/plugs
gloves - non-permeable
goggles
high-visibility vests/clothing
overalls and other protective clothing
respirator
safety glasses
safety shoes
splash-proof face masks
sun protection
tongs
ultraviolet protection
wet-work clothing.
Personnel may include:
client's staff
fellow workers (colleagues)
general public
venue/facility/building/shopping centre staff/management.
Rights and responsibilities of employees may relate to:
confidentiality and privacy rights
duty of care
knowing the appropriate personnel for reporting purposes
knowing the location of manuals and/or related documents
knowing the terms and conditions of own employment
knowing the workplace procedures
protection from discrimination and sexual harassment.
Rights and responsibilities of employers may relate to:
duty of care
providing a safe environment free from discrimination and sexual harassment (see relevant state and Commonwealth anti-discrimination legislation)
providing a safe workplace in accordance with OHS legislation, codes of practice, regulations and standards
providing information and training in work tasks, OHS and other employment related matters
the right to dismiss you if you (see the Commonwealth Workplace Relations Act 1996):
are negligent, careless or cause an accident
commit a criminal offence
commit acts of disloyalty such as revealing confidential information
use abusive language.
Signage and barriers may include:
physical barriers and restraints erected to restrict access to a site
signs complying with legislative requirements and/or Australian Standards warning of danger and/or adverse conditions including cleaning in progress and hazardous chemicals are in use or present in the work area.
Soil types may include:
dust
exhaust and soot
food and food scraps
graffiti (ink, texta, paint)
grease
oil
paint.
Waste may be either solid or liquid and include:
chemicals past the expiry date
hair nets
obsolete cleaning equipment
packaging
removed soil
used cleaning cloths
used containers
used or unused chemicals
used/contaminated personal protective equipment
water or water and chemical residue.
Work order information may include:
access to work site and egress points
budget allocations
completion times/dates
insufficient people to complete the work task(s)
job requirements and tasks
legislative requirements and local government
OHS requirements and emergency response procedures
resource requirements - equipment and chemicals
specific client requirements e.g. relationships with other activities, dress and presentation requirements
use of signage and barriers
work schedules
working in isolated and remote locations
work site contact person(s).
Work restrictions may include:
amount of cleaning anticipated
client activity
employee(s) level of literacy and/or communication skills
faulty or inappropriate equipment
site hazards
skills of the work unit/team
staffing resources
time limitations.
Sectors
Not Applicable
Employability Skills
Not Applicable
Licensing Information
Not Applicable