The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Disconnect equipment
|
|
Electrical characteristics of equipment and circuit are determined by reference to circuit drawings, schematics, reference manuals, equipment specifications, identification plate and/or consultation with technical adviser. Completed |
Evidence:
|
Where appropriate, equipment characteristics are determined and recorded to standard operating procedures (rotation etc.). Completed |
Evidence:
|
Point/s of isolation are identified using correct and appropriate procedure. Completed |
Evidence:
|
Equipment is isolated using correct and appropriate techniques and procedures. Completed |
Evidence:
|
All lock-off equipment and signage requirements are used correctly and appropriately. Completed |
Evidence:
|
Electrical isolation is proven using correct and appropriate techniques, procedures and test equipment. Completed |
Evidence:
|
Conductor layout is noted, recorded and labelled to standard operating procedure. Completed |
Evidence:
|
Conductors are disconnected using correct and appropriate techniques, procedures, tools and equipment. Completed |
Evidence:
|
Disconnected cables/connections are terminated and made safe to standard operating procedures. Completed |
Evidence:
|
Connect equipment
|
|
Characteristics of the equipment to be connected are identified and connection requirements are determined. Completed |
Evidence:
|
Circuit is checked for safe isolation using correct and appropriate techniques, procedures and test equipment. Completed |
Evidence:
|
Connections are checked and conductors are prepared for termination using correct and appropriate tools and procedures. Completed |
Evidence:
|
Conductors are connected to equipment to specifications using correct and appropriate techniques, tools and equipment. Completed |
Evidence:
|
All cables/wires/conduit are fastened/sealed to specifications using correct and appropriate techniques, tools and equipment. Completed |
Evidence:
|
All lock-off equipment and signage are removed using standard operating procedures. Completed |
Evidence:
|
Equipment and circuit are checked and tested for compliance with specifications using correct and appropriate techniques, procedures, tools and equipment. Completed |
Evidence:
|
Perform emergency first aid
|
|
Situation is assessed to identify points of danger to the injured person and potential rescuer. Completed |
Evidence:
|
Rescue/recovery of injured person or assistance to injured person is undertaken in accordance with recognised standards/procedures. Contact is made with the appropriate medical and rescue authorities. Completed |
Evidence:
|
Details of first aid given are recorded. Completed |
Evidence:
|