The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Interpret and comply with legal and industry requirements relating to fire system operations
|
|
Apply knowledge and understanding of legislative and industry requirements, including relevant state/territory building codes, to work procedures Completed |
Evidence:
|
Confirm or clarify knowledge and understanding of legislative and industry requirements, including state/territory building codes, where necessary, with relevant persons Completed |
Evidence:
|
Identify potential and actualbreaches of legislative and industry requirements and take action according to organisational requirements and OHS policies and procedures Completed |
Evidence:
|
Install a pre-engineered fire suppression system to mobile and transportable equipment
|
|
Obtain all necessary work permits prior to entering customer premises Completed |
Evidence:
|
Conduct risk assessment of equipment and determine risk reduction measures in accordance with legislative and industry requirements. Completed |
Evidence:
|
Confirm the installation site as appropriate according to customer requirements and manufacturers' specifications Completed |
Evidence:
|
Determine system scope of protection, fire system operational parameters and fire system/equipment interfaces according to customer requirements, Australian Standards and manufacturers' specifications Completed |
Evidence:
|
Plan the installation and location of all equipment with relevant person to satisfy customer requirements and manufacturers' specifications Completed |
Evidence:
|
Assemble materials ready for installation in accordance with manufacturer specifications Completed |
Evidence:
|
Install all system components according to customer requirements, Australian Standards, manufacturers' instructions and specifications Completed |
Evidence:
|
Install auxiliary shutdown fire system/equipment interface and alarm device connections in accordance with customer requirements, Australian Standards and manufacturers' specifications Completed |
Evidence:
|
Commission system in accordance with customer requirements, Australian Standards and manufacturers' specifications Completed |
Evidence:
|
Leave the installation site clean and tidy on completion of work functions Completed |
Evidence:
|
Complete all documentation and provide system manual to client specific to the installed equipment Completed |
Evidence:
|
Inspect pre-engineered fire suppression system fitted to mobile and transportable equipment
|
|
Identify the type of fire suppression equipment and system to be inspected and tested according to manufacturers' mode of operation and application Completed |
Evidence:
|
Identify, locate and inspect components of the pre-engineered fire suppression system according to function, manufacturers' manuals and Australian Standards Completed |
Evidence:
|
Identify and inspect auxiliary shutdown fire system/equipment interfaces and alarm devices forming part of the fire suppression system Completed |
Evidence:
|
Identify potential and actual breaches of the fire suppression equipment and system performance in reference to and in accordance with state/territory building codes, manufacturers' documentation and Australian Standards Completed |
Evidence:
|
Test an installed fire suppression system fitted to mobile and transportable equipment
|
|
Obtain all necessary work permits prior to entering customer premises Completed |
Evidence:
|
Complete pre-testing procedures according to the requirements of the service manual and manufacturers' instructions and specifications Completed |
Evidence:
|
Adhere to all safety procedures according to organisational requirements, customer requirements and manufacturers' requirements Completed |
Evidence:
|
Complete and record testing procedures according to the relevant maintenance schedule, Australian Standards and manufacturers' documentation Completed |
Evidence:
|
Complete documentation for recording test and inspection results according to organisational requirements, customer requirements and manufacturers' requirements Completed |
Evidence:
|
Maintain and repair an installed fire suppression system fitted to mobile and transportable equipment
|
|
Obtain all necessary work permits prior to entering customer premises Completed |
Evidence:
|
Consult with relevant persons before commencing maintenance and repair procedures Completed |
Evidence:
|
Maintain the system according to the requirements of the relevant maintenance schedule, Australian Standards and manufacturers' documentation Completed |
Evidence:
|
Report and rectify faulty equipment and/or extinguishing agent in accordance with work procedures, customer requirements and manufacturers' technical specifications Completed |
Evidence:
|
Reinstate system to fully operational status as specified in manufacturers' documentation and system design standards Completed |
Evidence:
|
Adhere to all safety procedures according to organisational requirements, customer requirements and manufacturers' requirements. Completed |
Evidence:
|
Complete all documentation relating to maintenance and repairs carried out, advise client and distribute according to organisational requirements and customer requirements Completed |
Evidence:
|