Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UETTDRTP32 Mapping and Delivery Guide
Maintain energised transmission lines using high voltage live work bare hand method

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UETTDRTP32 - Maintain energised transmission lines using high voltage live work bare hand method
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to maintain energised transmission lines using high voltage (HV) live work bare hand method in the electricity supply industry (ESI).It includes maintaining live work using bare hand method, verifying site conditions and potential hazards, conformation and calculation of physical loads and selection of appropriate and authorised work methods. It also includes preparing and cleaning specialist material and tools in accordance with authorised technical instructions, undertaking work health and safety (WHS)/occupational health safety (OHS) safe working practices, and rendering inoperative the automatic re-closing device including its restoration, in accordance with the work plan and procedures for issuing/accepting live work authorities/permits and/or relevant work documents.The application of the skills and knowledge described in this unit may require a licence to operate specific pieces of equipment such as elevated work platforms.Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Transmission
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to maintain energised transmission lines using HV live work bare hand method
  • Work schedules, construction plans, drawings, workplace procedures and material lists are obtained and analysed
       
Element: Job requirements and workplace procedures are identified and communicated with relevant personnel
       
Element: Hazards are identified, WHS/OHS risks assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
       
Element: Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
       
Element: Risk control measures are identified, prioritised and evaluated against the work schedule
       
Element: Relevant work permits are obtained and signed in accordance with workplace procedures
       
Element: Equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
       
Element: Relevant personnel at worksite are confirmed current in first aid, cardiopulmonary resuscitation (CPR) and other rescue procedures in accordance with job requirements and/or workplace procedures
       
Element: Liaison and communication issues with authorised personnel, authorities, clients and land owners are resolved to perform work, as required
       
Element: Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
       
Element: Personnel participating in work are fully briefed and responsibilities confirmed in accordance with workplace procedures
       
Element: Traffic management is planned and implemented in accordance with workplace procedures
       
Element: Perform maintenance of transmission lines using HV live work bare hand method
  • WHS/OHS, sustainable energy and environmental principles and practices are monitored and actioned to reduce incidents of accidents in accordance with workplace procedures
       
Element: First aid, CPR and other rescue procedures are performed in accordance with job requirements and/or workplace procedures
       
Element: Requirements for lifting, climbing, working at heights, confined spaces and use of power tools/equipment are followed in accordance with workplace procedures
       
Element: Auto-reclose devices and associated circuits are rendered inoperative and necessary work documentation obtained in accordance with workplace procedures
       
Element: Hazard warnings and safety signs are recognised and hazards and assessed WHS/OHS risks are reported to immediate authorised personnel for directions in accordance with workplace procedures
       
Element: Remedial actions are taken to overcome shortfalls encountered in the work schedule in accordance with job requirements and workplace procedures
       
Element: Maintenance of energised HV overhead electrical transmission apparatus is performed in accordance with work schedules, job requirements and workplace procedures
       
Element: Energised HV overhead electrical transmission apparatus is maintained to ensure completion in agreed timeframes, to quality standards and with minimum waste in accordance with workplace procedures
       
Element: Solutions to non-routine problems are identified and actioned using in accordance with workplace procedures
       
Element: Quality checks of work are undertaken in accordance with industry standards and workplace procedures
       
Element: Complete the maintenance of transmission lines using HV live work bare hand method
  • Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures
       
Element: Accidents and/or injuries are reported and followed up in accordance with requirements/workplace procedures
       
Element: Worksite is rehabilitated, cleaned up and confirmed safe in accordance with workplace procedures
       
Element: Tools, equipment, surplus resources and materials are cleaned, checked and returned to storage in accordance with workplace procedures
       
Element: Relevant work permits are signed off and client/customer advised in accordance with workplace procedures
       
Element: Work records, reports and/or documentation are completed in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work schedules, construction plans, drawings, workplace procedures and material lists are obtained and analysed 
 
 
 
 
 
 
 
 
 
 
 
WHS/OHS, sustainable energy and environmental principles and practices are monitored and actioned to reduce incidents of accidents in accordance with workplace procedures 
 
 
 
 
 
 
 
 
 
Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures 
 
 
 
 
 

Forms

Assessment Cover Sheet

UETTDRTP32 - Maintain energised transmission lines using high voltage live work bare hand method
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UETTDRTP32 - Maintain energised transmission lines using high voltage live work bare hand method

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: